Before disassembling the rear seat inner belt assembly you must first uninstall the rear seat 3 point type belt assembly through bolt removal on an 8-Passenger configuration model. Perform the same steps to remove the inner belt assembly under 7-Passenger configuration. When removing the bolt from the rear seat 3 point type belt assembly at its RH position keep to the disassembly guidelines for power and manual seat types. After using bolt removal according to disassembly instructions for power and manual seats on the left-hand side, proceed to eliminate the rear seat inner belt assembly. For installation of the rear seat 3 point type belt assembly you should begin with the 8-Passenger version by using the bolt then torquing it to 42 N.m (430 kgf.cm, 31 ft.lbf). Install the rear seat 3 point type belt assembly for the 7-Passenger configuration according to the same torque specifications. Reassemble the rear seat 3 point belt assembly on the RH side by inserting the bolt before torquing it to 42 N.m (430 kgf.cm, 31 ft.lbf) as per the reassembly procedures for both power and manual seat types. You must now install the rear seat inner belt assembly with its bolt fastened to the LH side before torqueing it to 42 N.m (430 kgf.cm, 31 ft.lbf) according to both power and manual seat type reassembly instructions.