×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2009 Toyota Sienna Alternator Bearing
Alternator Pulley Bearing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Alternator Bearings found
2009 Toyota Sienna Rear Bearing
Part Number: 90068-10222$21.14 MSRP: $29.43You Save: $8.29 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Bearing, Ball; Alternator Bearing; Bearings; Bearing(For Alternator Rotor)
- Part Name Code: 27330A
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.4 x 2.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90068-10222
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2009 Toyota Sienna Front Bearing
Part Number: 90068-10033$17.91 MSRP: $24.93You Save: $7.02 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Bearing; Alternator Bearing; Bearings; Bearing(For Alternator Drive End Frame); Bearing(For Alternator Rotor)
- Replaces: 90099-10223
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.9 x 11.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90068-10033
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2009 Toyota Sienna Alternator Bearing
Looking for affordable OEM 2009 Toyota Sienna Alternator Bearing? Explore our comprehensive catalogue of genuine 2009 Toyota Sienna Alternator Bearing. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Sienna Alternator Bearing Parts Q&A
- Q: How to replace the Alternator Bearing on 2009 Toyota Sienna?A: The replacement of the generator drive end frame bearing starts with removing four screws and a retainer plate from the drive end frame. By using Special Service Tools: 09950-60010 and 09951-00250 and a hammer, technicians should tap out the drive end frame bearing that is embedded in the drive end frame. The installation of a new generator drive end frame bearing requires Special Service Tool: 09950-60010 and 09951-00470 operating with a press. To install the retainer plate position its tabs inside the drive end frame cutouts and then secure it with 4 screws torqued to 2.3 Nm (23 kgf-cm, 20 in-lbf).