OEM 2009 Toyota Sequoia Valve Body

2009 Toyota Sequoia Parts Questions & Experts Answers

• Q: How to install the transmission valve body assembly on 2009 Toyota Sequoia?

  A: First install the spring and check ball body. Afterward place the manual valve pin through its hole in the manual valve lever. Material: 19 bolts must be tightened to 11 Nm (112 kgf-cm, 8 ft-lbf) with A bolt measuring 36 mm (1.42 in.) and B bolt measuring 25 mm (0.984 in.). After mounting the detent spring cover and detent spring through the bolt application of 10 Nm (102 kgf-cm, 7 ft-lbf) torque. To finish the installation procedure first attach the transmission wire before adding the valve body oil strainer assembly followed by installation of the automatic transmission oil pan sub-assembly. Place automatic transmission fluid into the system before checking and adjusting the fluid level correctly followed by inspecting automatic transmission fluid leakage points.