×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota Sequoia Valve Body
Trans Valve Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Valve Body found
2008 Toyota Sequoia Valve Body
Part Number: 35410-0C070$926.83 MSRP: $1358.28You Save: $431.45 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Body Assembly, Transmission Valve
- Replaces: 35410-0C040, 35410-0C041
- Part Name Code: 35410
- Item Weight: 17.80 Pounds
- Item Dimensions: 18.7 x 12.4 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 35410-0C070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Sequoia Valve Body
Looking for affordable OEM 2008 Toyota Sequoia Valve Body? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Valve Body. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Sequoia Valve Body Parts Q&A
- Q: How to install the transmission valve body assembly on 2008 Toyota Sequoia?A: The manual valve lever receives the pin along with its hole for assembly while 19 bolts must be installed with 11 Nm (112 kgf-cm, 8 ft-lbf) torque; bolt A measures 36 mm (1.42 in.) while bolt B measures 25 mm (0.984 in.). Guide the installation of the detent spring cover together with the detent spring by using a bolt which requires a torque of 10 Nm (102 kgf-cm, 7 ft-lbf). The transmission wire must be connected then valve body oil strainer assembly needs installation before putting on the automatic transmission oil pan sub-assembly. Automatic transmission fluid installation and correct fluid level adjustment should follow the leak inspection procedure.