Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 35410-0C070
Valve Body

2007-2022 Toyota 354100C070

Customer Questions & Expert Answers (10)
Toyota 35410-0C070 Valve Body
Toyota 35410-0C070 Valve Body
Toyota 35410-0C070 Valve Body
  • Part Description
    Body Assembly, Transmission Valve
  • Part Name Code
    35410
  • Replaces
    35410-0C040, 35410-0C041
  • Manufacturer
    Toyota
Make sure this part fits
$926.83 MSRP: $1358.28
You Save: $431.45 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code35410
    Manufacturer Part Number35410-0C070
    Part DescriptionBody Assembly, Transmission Valve
    Item Dimensions18.7 x 12.4 x 10.1 inches
    Item Weight17.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces35410-0C040, 35410-0C041
    ManufacturerToyota
    SKU35410-0C070
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2022 Toyota SequoiaLimited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
    2007-2013 Toyota TundraBase, Limited, Platinum, SR56 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

  • Customer Questions & Expert Answers

    Q:
    Can you provide the right 35410-0C070 for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 35410-0C070 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to remove and replace the valve body assembly in the A750E automatic transmission/transaxle on Toyota Sequoia? Posted by Customer
    A:
    The first step for installing or replacing the valve body assembly in A750E automatic transmission/transaxle requires draining automatic transmission fluid. Initialize the procedure by draining automatic transmission fluid and subsequently removing automatic transmission oil pan sub-assembly followed by valve body oil strainer assembly. Bolt removal on the transmission must be followed by disconnecting the transmission wire before proceeding to take off the bolt and the detent spring cover and the detent spring of the transmission valve body assembly. Proceed to remove the 19 bolts which secure the valve body followed by a single action to extract the check ball body and spring without allowing them to fall.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to install the transmission valve body assembly on Toyota Sequoia? Posted by Customer
    A:
    The manual valve lever receives the pin along with its hole for assembly while 19 bolts must be installed with 11 Nm (112 kgf-cm, 8 ft-lbf) torque; bolt A measures 36 mm (1.42 in.) while bolt B measures 25 mm (0.984 in.). Guide the installation of the detent spring cover together with the detent spring by using a bolt which requires a torque of 10 Nm (102 kgf-cm, 7 ft-lbf). The transmission wire must be connected then valve body oil strainer assembly needs installation before putting on the automatic transmission oil pan sub-assembly. Automatic transmission fluid installation and correct fluid level adjustment should follow the leak inspection procedure.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to install the A750E automatic transmission valve body assembly on Toyota Tundra? Posted by Customer
    A:
    The automatic transmission valve body assembly of the A750E requires spring and check ball body installation first followed by manual valve pin insertion into the manual valve lever before screwing all 19 bolts with 11 Nm (112 kgf-cm, 8 ft-lbf) torque using 36 mm (1.42 in.) bolt A and 25 mm (0.984 in.) bolt B. Install the detent spring cover and detent spring through a bolt which needs 10 Nm (102 kgf-cm, 7 ft-lbf) torque. The procedure ends with transmission wire connection followed by valve body oil strainer assembly installation then automatic transmission oil pan sub-assembly fitment. Connect the cable to the negative battery terminal yet initialization procedures should follow for certain systems while adding automatic transmission fluid whenever necessary.
    Posted by ToyotaPartsNow Specialist
    Q:
    How many bolts secure the valve body that need to be removed for the 2008 Toyota Sequoia? Posted by Customer
    A:
    Remove 19 bolts securing the valve body.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Valve Body
    Q:
    What is the next step after securing the manual valve for the 2009 Toyota Sequoia? Posted by Customer
    A:
    Install the detent spring cover and detent spring with a bolt, applying a torque of 10 Nm (102 kgf-cm, 7 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Valve Body
    Q:
    What should be added as needed after the installation for the 2009 Toyota Tundra? Posted by Customer
    A:
    Add automatic transmission fluid as needed.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Valve Body
    Q:
    What should be done after removing the 19 bolts for the 2009 Toyota Tundra? Posted by Customer
    A:
    Remove the check ball body and spring, taking care not to drop them.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Valve Body
    Q:
    Is there anything else to consider after reconnecting the battery cable for the 2007 Toyota Tundra? Posted by Customer
    A:
    Note that some systems may require initialization after reconnecting the cable.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Valve Body
    Q:
    What should be done last when removing the valve body assembly for the 2008 Toyota Tundra? Posted by Customer
    A:
    Carefully remove the check ball body and spring, taking care not to drop them.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Valve Body
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 35410-0C070, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 35410-0C070 Valve Body. It is sometimes referred to as Toyota Valve Body. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 354100C070 Valve Body. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery