OEM 2009 Toyota Sequoia Shift Cable

2009 Toyota Sequoia Shift Cable Parts Q&A

• Q: How to install the Shift Cable assembly for the A750E automatic transmission/transaxle on 2009 Toyota Sequoia?

  A: The first step of installing the transmission control cable assembly for the A750E automatic transmission/transaxle begins with inserting the floor shift transmission control cable from inside the vehicle while using 2 bolts to secure the cable retainer which needs a torque setting of 5.5 Nm (56 kgf-cm, 49 in-lbf). You should then connect the cable outer component to the shift lever retainer before adding a brand new clip. Connect the shift lever control cable end while positioning the inner cable without twisting and maintaining the upward orientation of the ridged cable end. Next set the control shaft lever counterclockwise until it stops and continue clockwise rotation for two notches to reach the N position. After that install the new clip and nut but position the cable L bracket toward the inside of the vehicle. Then fix the transmission control cable support with another nut while torquing both nuts to 5.5 Nm (56 kgf-cm, 49 in-lbf). The installation of the front console box assembly must be completed while performing inspections and required adjustments to the shift lever position.