How to service and repair a Hood Cable on 2009 Toyota Matrix?

The hood cable service requires beginners to start by first detaching the front wheel and front fender liner sections. You must rotate the pin 90 degrees to break the pin hold clip and then unscrew 9 clips alongside 5 screws to finish by removing 3 grommets with the liner; note that new grommets are essential because they will break while detached. Your next step requires you to detach the hood lock assembly after removing three bolts together with the hood lock control cable. The second step of disconnecting the hood lock control cable allows you to pull out the hood lock control lever sub-assembly. You should disconnect the hood lock control cable assembly by using a screwdriver for clamp removal while taping the screwdriver tip until you finally pull the cable out of the engine compartment.

OEM 2009 Toyota Matrix Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Cables found

View related parts
2009 Toyota Matrix Release Handle, Dark Gray, Front
Part Number: 53601-02020-B1
$46.38 MSRP: $64.56
You Save: $18.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Part Name Code: 53601
- Item Weight: 0.70 Pounds
- Item Dimensions: 0.7 x 12.4 x 20.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53601-02020-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- Base, S, XR, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Matrix Release Cable, Front
Part Number: 53630-02190
$35.40 MSRP: $49.28
You Save: $13.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Part Name Code: 53630
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.7 x 11.0 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53630-02190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS

2009 Toyota Matrix Hood Cable

Looking for affordable OEM 2009 Toyota Matrix Hood Cable? Explore our comprehensive catalogue of genuine 2009 Toyota Matrix Hood Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Matrix Parts Questions & Experts Answers

Q: How to service and repair a Hood Cable on 2009 Toyota Matrix?
A: The hood cable service requires beginners to start by first detaching the front wheel and front fender liner sections. You must rotate the pin 90 degrees to break the pin hold clip and then unscrew 9 clips alongside 5 screws to finish by removing 3 grommets with the liner; note that new grommets are essential because they will break while detached. Your next step requires you to detach the hood lock assembly after removing three bolts together with the hood lock control cable. The second step of disconnecting the hood lock control cable allows you to pull out the hood lock control lever sub-assembly. You should disconnect the hood lock control cable assembly by using a screwdriver for clamp removal while taping the screwdriver tip until you finally pull the cable out of the engine compartment.