How to service and repair a Hood Cable on Toyota Matrix?

When replacing the hood cable, the front wheel and fender liner must be removed, by unattaching clips and screws, but new grommets will be required. Next, remove the hood lock assembly and the control cable and lastly, remove the clamps and pull the cable off of the engine compartment.

How to install the hood cable assembly on Toyota Matrix?

To fit the hood lock control cable assembly, make it go through the upper radiator support and fit the clamps. Install the hood lift lever, grease with MP, install the hood cable and fasten it with 3 bolts of 7.5 Nm. Check the hood, fit the fender liner and front wheel.

OEM Toyota Matrix Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Hood Cables found

View related parts
Toyota Matrix Release Cable, Front
Part Number: 53630-02061
$39.90 MSRP: $55.53
You Save: $15.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Replaces: 53630-02060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Matrix Release Cable, Front
Part Number: 53630-02190
$35.48 MSRP: $49.39
You Save: $13.91 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Matrix | Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Matrix Release Handle, Dark Gray, Front
Part Number: 53601-02020-B1
$46.47 MSRP: $64.68
You Save: $18.21 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2013 Toyota Matrix | Base, S, XR, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS

Toyota Matrix Hood Cable

If you're thinking about purchasing OEM parts for your Toyota Matrix, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Matrix Hood Cable at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Matrix Hood Cable Parts and Q&A

Release Handle, Dark Gray, Front
53601-02020-B1
Q: How to service and repair a Hood Cable on Toyota Matrix?
A: When replacing the hood cable, the front wheel and fender liner must be removed, by unattaching clips and screws, but new grommets will be required. Next, remove the hood lock assembly and the control cable and lastly, remove the clamps and pull the cable off of the engine compartment.
Release Cable, Front
53630-02190
Q: How to install the hood cable assembly on Toyota Matrix?
A: To fit the hood lock control cable assembly, make it go through the upper radiator support and fit the clamps. Install the hood lift lever, grease with MP, install the hood cable and fasten it with 3 bolts of 7.5 Nm. Check the hood, fit the fender liner and front wheel.