How to install the Coolant Temperature Sensor on 2009 Toyota Highlander?

Installation of the Engine Coolant Temperature Sensor begins with laying a new gasket on the sensor before installing it while ensuring a torque setting of 20 Nm (204 kgf-cm, 15 ft-lbf). Fitting the engine coolant temperature sensor requires attaching the sensor connector. The installation of the air cleaner case must be followed by installation of the air cleaner cap sub-assembly. Following the vacuum switching valve is the No. 1 valve installation. Place the new gasket on the sensor, install the sensor, apply 20 Nm torque, then connect the engine coolant temperature sensor connector. Next, add engine coolant and examine for any leaks. The installation process should start with the No. 1 engine cover sub-assembly following the outer cowl top panel sub-assembly. Install the windshield wiper motor and link followed by the No. 1 engine under cover installation to finish the procedure.

OEM 2009 Toyota Highlander Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Coolant Temperature Sensors found

View related parts
2009 Toyota Highlander Coolant Temperature Sensor
Part Number: 89422-35010
$69.78 MSRP: $97.95
You Save: $28.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Water Temperature; Engine Coolant Temperature Sensor; Sender Unit; Cooling Fan Temp Switch; Sensor, Water Temperature (For E.F.I.); Sensor, Fuel Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 14.1 x 11.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89422-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2009 Toyota Highlander Coolant Temperature Sensor
Part Number: 89422-33030
$69.78 MSRP: $97.95
You Save: $28.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Water Temperature; Engine Coolant Temp; Cooling Fan Temp Switch; Temperature Sensor; Sensor, Water Temperature (For E.F.I.)
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.4 x 1.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89422-33030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, L, LE, LE Plus, Limited, Platinum, Plus, SE, Sport, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Coolant Temperature Sensor
Part Number: 89422-33020
$68.84 MSRP: $96.62
You Save: $27.78 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Water Temperature; Engine Coolant Temp; Cooling Fan Temp Switch; Temperature Sensor; Sensor, Water Temperature (For E.F.I.)
- Manufacturer Note: P/N LABEL=8942233020
- Part Name Code: 89422
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.4 x 1.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89422-33020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)

2009 Toyota Highlander Coolant Temperature Sensor

Looking for affordable OEM 2009 Toyota Highlander Coolant Temperature Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Coolant Temperature Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Highlander Coolant Temperature Sensor Parts Q&A

Q: How to install the Coolant Temperature Sensor on 2009 Toyota Highlander?
A: Installation of the Engine Coolant Temperature Sensor begins with laying a new gasket on the sensor before installing it while ensuring a torque setting of 20 Nm (204 kgf-cm, 15 ft-lbf). Fitting the engine coolant temperature sensor requires attaching the sensor connector. The installation of the air cleaner case must be followed by installation of the air cleaner cap sub-assembly. Following the vacuum switching valve is the No. 1 valve installation. Place the new gasket on the sensor, install the sensor, apply 20 Nm torque, then connect the engine coolant temperature sensor connector. Next, add engine coolant and examine for any leaks. The installation process should start with the No. 1 engine cover sub-assembly following the outer cowl top panel sub-assembly. Install the windshield wiper motor and link followed by the No. 1 engine under cover installation to finish the procedure.

Alternate Year Models

2008 Toyota Highlander Coolant Temperature Sensor 2010 Toyota Highlander Coolant Temperature Sensor