OEM 2009 Toyota FJ Cruiser Throttle Body

2009 Toyota FJ Cruiser Throttle Body Parts Questions & Experts Answers

• Q: How to install the throttle body with motor body assembly on 2009 Toyota FJ Cruiser?

  A: The first step to install the throttle body with motor body assembly involves mating the No. 4 and No. 5 water by-pass hoses to the throttle body. Install the new gasket before fastening the throttle with motor body through 4 bolts that need torquing to 11 Nm (112 kgf-cm, 9 ft-lbf). Start the throttle motor installation by attaching its connector and proceeding with No. 4 and No. 5 water by-pass hose connections. First place the air cleaner assembly on top of the throttle body and hook it up with an air cleaner hose before tightening the two bolts to 8.0 Nm (82 kgf-cm, 71 in-lbf). Symmetrically connect the mass air flow meter connector and secure the 2 wire harness clamps while joining the vacuum hose with the No. 2 ventilation hose. The cable needs to be fastened to the negative terminal of the battery with a torque of 3.9 Nm (40 kgf-cm, 35 in-lbf). You should both add engine coolant and inspect for any sign of fluid leakages. Tighten the V-bank cover into place by using 2 nuts which require torquing to 7.5 Nm (76 kgf-cm, 66 in-lbf).