OEM 2009 Toyota FJ Cruiser Fuel Level Sensor

2009 Toyota FJ Cruiser Fuel Level Sensor Parts Q&A

• Q: How to install the Fuel Level Sensor assembly on 2009 Toyota FJ Cruiser?

  A: Begin by attaching the fuel level sensor into the fuel suction with pump and gauge tube then link the fuel level sensor connector. You should start by installing the fuel suction with pump and gauge tube assembly followed by installation of the fuel tank main tube then the fuel tank return tube assembly. Installation of the fuel tank assembly must be followed by attaching fuel tank vent hoses and uniting fuel tank main and return tubes. The next step includes uniting the fuel tank breather tube sub-assembly with the fuel tank to filler pipe hose. First install the No. 1 fuel tank protector sub-assembly and after that add the rear floor service hole cover and finally place the rear seat cushion assembly LH. The workforce installs the rear door scuff plate LH followed by the front door scuff plate LH. Before lastly you need to connect the cable to the negative battery terminal with a torque setting of 3.9 Nm (40 kgf-cm, 35 in-lbf) and perform a fuel leak check.