How to install the Engine Control Module (ECM) on 2009 Toyota FJ Cruiser?

Start the installation process of the 1GR-FE engine control ECM by mounting the No. 1 ECM bracket through two 3.0 Nm screws that need to be torqued to 3.0 Nm. Mount the ECM bracket number two after tightening both screws to 3.0 Nm with standard torque values of 32 kgf-cm but also equivalent to 28 in-lbf. Mounting of the ECM requires 3 nuts that must be tightened to 8.0 Nm (82 kgf-cm, 71 in-lbf) while attaching its 5 connectors. Loop the bolt onto the four wheel drive control ECU (for Automatic Transmission 4WD) then fasten with 8.0 Nm (82 kgf-cm, 71 inch pounds) torque and connect the terminal. Before installation of the glove compartment door assembly proceed. Screw the cable to the negative side of the battery before securing it at 3.9 Nm (40 kgf-cm, 35 in-lbf torque level).

OEM 2009 Toyota FJ Cruiser Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Engine Control Modules found

View related parts
2009 Toyota FJ Cruiser ECM
Part Number: 89661-35F71
$816.96 MSRP: $1197.27
You Save: $380.31 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Replaces: 89661-35F70
- Part Name Code: 89661
- Item Weight: 2.20 Pounds
- Item Dimensions: 13.1 x 10.3 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89661-35F71
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota FJ Cruiser ECM
Part Number: 89661-35F60
$727.47 MSRP: $1066.11
You Save: $338.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Part Name Code: 89661
- Item Weight: 2.20 Pounds
- Item Dimensions: 13.0 x 10.0 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89661-35F60
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota FJ Cruiser ECM
Part Number: 89661-35E20
$721.39 MSRP: $1057.21
You Save: $335.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Part Name Code: 89661
- Item Weight: 2.20 Pounds
- Item Dimensions: 13.2 x 9.8 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89661-35E20
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota FJ Cruiser ECM
Part Number: 89661-35E10
$670.89 MSRP: $983.19
You Save: $312.30 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Part Name Code: 89661
- Item Weight: 2.20 Pounds
- Item Dimensions: 12.7 x 10.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89661-35E10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
- Base | 6 Cyl 4.0 L GAS

2009 Toyota FJ Cruiser Engine Control Module

Looking for affordable OEM 2009 Toyota FJ Cruiser Engine Control Module? Explore our comprehensive catalogue of genuine 2009 Toyota FJ Cruiser Engine Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota FJ Cruiser Engine Control Module Parts Q&A

Q: How to install the Engine Control Module (ECM) on 2009 Toyota FJ Cruiser?
A: Start the installation process of the 1GR-FE engine control ECM by mounting the No. 1 ECM bracket through two 3.0 Nm screws that need to be torqued to 3.0 Nm. Mount the ECM bracket number two after tightening both screws to 3.0 Nm with standard torque values of 32 kgf-cm but also equivalent to 28 in-lbf. Mounting of the ECM requires 3 nuts that must be tightened to 8.0 Nm (82 kgf-cm, 71 in-lbf) while attaching its 5 connectors. Loop the bolt onto the four wheel drive control ECU (for Automatic Transmission 4WD) then fasten with 8.0 Nm (82 kgf-cm, 71 inch pounds) torque and connect the terminal. Before installation of the glove compartment door assembly proceed. Screw the cable to the negative side of the battery before securing it at 3.9 Nm (40 kgf-cm, 35 in-lbf torque level).