×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2009 Toyota Corolla Ball Joint
Control Arm Joint- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Ball Joint found
2009 Toyota Corolla Lower Ball Joint
Part Number: 43330-09670$57.23 MSRP: $79.65You Save: $22.42 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Joint Set, Lower Ball; Suspension Ball Joint, Front; Joint Assembly, Lower Ball, Front Passenger Side; Front Driver Side; Suspension Ball Joint.
- Position: Lower
- Replaces: 43330-29425, 43330-09190
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.4 x 3.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43330-09670
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2009 Toyota Corolla Ball Joint
Looking for affordable OEM 2009 Toyota Corolla Ball Joint? Explore our comprehensive catalogue of genuine 2009 Toyota Corolla Ball Joint. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Corolla Ball Joint Parts Q&A
- Q: How to remove the front lower ball joint on 2009 Toyota Corolla?A: Start the front lower ball joint replacement by removing the front wheel followed by disconnecting the front axle shaft nut according to the 2AZ-FE or 2ZR-FE model. Detach the front speed sensor by removing the bolt and breaking its connection to the front shock absorber bracket while steering knuckle. Maintain clean conditions on the sensor tip along with installation surfaces and avoid sensor rotation from its initial position. Proceed by disconnecting the front disc brake caliper assembly and disc and sub-assembly of the tie rod end. First uncouple the front lower suspension arm after removing its bolt and two nuts and afterward take out the front axle assembly. Secure the front axle assembly inside a vise without putting excessive force before proceeding to remove the cotter pin and nut. The front lower ball joint requires the installation of Special Service Tool: 09960-20010 at its position and should measure a 1 mm (0.04 in.) clearance between the tool and front axle assembly. The front lower ball joint removal can be handled using Special Service Tools 09960-20010 and 09961-02010 together with bolt thread and tool bolt end greasing. The tool needs to be installed with parallel components A and B before the user adds a wrench to the specified part while preserving the front lower ball joint dust cover from damage.