How to remove and replace the axle shaft assembly on 2009 Toyota Corolla?

The first step to change the front drive shaft assembly on a 2ZR-FE vehicle requires engineers to remove engine under covers from both left and right sides and evacuate manual transaxle oil and automatic transaxle fluid when necessary. The next step involves using Special Service Tool: 09930-00010 alongside a hammer to unstake the front axle shaft nuts from both sides before using a 30 mm socket wrench. To perform the operation disconnect the front speed sensors and stabilizer link assemblies from both sides followed by separating the tie rod end sub-assemblies and lower suspension arms similarly. The two steps for disengaging front axle assembly fittings require using a plastic hammer to push out the left fitting in a controlled manner while protecting both the outboard joint boot and speed sensor rotor before repeating the process on the right side. Use Special Service Tool: 09520-01010, 09520-24010, 09520-32040 on the left side while a hammer and brass bar work on the right side to extract the front drive shaft assemblies until tool clearance is reached while protecting oil seals and inboard joint boots from damage. You should use screwdrivers to remove the snap rings from the front drive shaft holes on both sides before securely placing the left-side front axle assembly using Special Service Tool: 09608-02021, 09608-16042, and 09608-02041. Make sure to uphold the hub bearing with support during weight application of the vehicle.

OEM 2009 Toyota Corolla Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Axle Shafts found

View related parts
2009 Toyota Corolla Axle Assembly, Driver Side
Part Number: 43420-02B12
$280.95 MSRP: $427.68
You Save: $146.73 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Left; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Driver Side; CV Axle Assembly
- Position: Driver Side
- Replaces: 43420-02B11, 43420-02B10, 43420-02820, 43420-01110
- Part Name Code: 43420
- Item Weight: 15.80 Pounds
- Item Dimensions: 31.6 x 8.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43420-02B12
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- 50th Anniversary Special Edition, Base, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
2009 Toyota Corolla Axle Assembly, Passenger Side
Part Number: 43410-02A03
$308.77 MSRP: $467.38
You Save: $158.61 (34%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Right; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Passenger Side; CV Axle Assembly
- Position: Passenger Side
- Replaces: 43410-02760, 43410-02A02, 43410-01130, 43410-02A01, 43410-01131, 43410-02A00
- Part Name Code: 43410
- Item Weight: 20.20 Pounds
- Item Dimensions: 41.8 x 7.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43410-02A03
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- 50th Anniversary Special Edition, Base, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
2009 Toyota Corolla Axle Assembly, Passenger Side
Part Number: 43410-01140
$446.95 MSRP: $655.02
You Save: $208.07 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Right; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Passenger Side; CV Axle Assembly
- Position: Passenger Side
- Part Name Code: 43410
- Item Weight: 14.80 Pounds
- Item Dimensions: 29.2 x 7.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43410-01140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- XRS | 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Axle Assembly, Driver Side
Part Number: 43420-01120
$400.76 MSRP: $587.32
You Save: $186.56 (32%)
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Left; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Driver Side; CV Axle Assembly
- Position: Driver Side
- Part Name Code: 43420
- Item Weight: 14.80 Pounds
- Item Dimensions: 29.2 x 7.6 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43420-01120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- XRS | 4 Cyl 2.4 L GAS

2009 Toyota Corolla Axle Shaft

Looking for affordable OEM 2009 Toyota Corolla Axle Shaft? Explore our comprehensive catalogue of genuine 2009 Toyota Corolla Axle Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Corolla Axle Shaft Parts Q&A

Q: How to remove and replace the axle shaft assembly on 2009 Toyota Corolla?
A: The first step to change the front drive shaft assembly on a 2ZR-FE vehicle requires engineers to remove engine under covers from both left and right sides and evacuate manual transaxle oil and automatic transaxle fluid when necessary. The next step involves using Special Service Tool: 09930-00010 alongside a hammer to unstake the front axle shaft nuts from both sides before using a 30 mm socket wrench. To perform the operation disconnect the front speed sensors and stabilizer link assemblies from both sides followed by separating the tie rod end sub-assemblies and lower suspension arms similarly. The two steps for disengaging front axle assembly fittings require using a plastic hammer to push out the left fitting in a controlled manner while protecting both the outboard joint boot and speed sensor rotor before repeating the process on the right side. Use Special Service Tool: 09520-01010, 09520-24010, 09520-32040 on the left side while a hammer and brass bar work on the right side to extract the front drive shaft assemblies until tool clearance is reached while protecting oil seals and inboard joint boots from damage. You should use screwdrivers to remove the snap rings from the front drive shaft holes on both sides before securely placing the left-side front axle assembly using Special Service Tool: 09608-02021, 09608-16042, and 09608-02041. Make sure to uphold the hub bearing with support during weight application of the vehicle.