OEM 2009 Toyota 4Runner Windshield

2009 Toyota 4Runner Parts Questions & Experts Answers

• Q: How to install windshield glass on 2009 Toyota 4Runner?

  A: WINDSHIELD GLASS NO. 2 STOPPER requires an application of Primer G on its installation area which needs to dry for 3 minutes before installing two new stoppers onto the glass. The installation of WINDSHIELD GLASS NO. 1 STOPPER starts with placing 2 new stoppers directly onto the vehicle body. The installation part of WINDOW GLASS ADHESIVE DAM requires Primer G before cleaning it and waiting three minutes to apply new self-adhesive tape around the glass while keeping stopper installation zones clear. Apply Primer G to both the glass edge and contact surface of WINDSHIELD MOULDING OUTER UPPER but allow it to dry for 3 minutes before putting it in place. Require the vehicle body contact surface to undergo cleaning followed by shaping its adhesive area before cutting away rough parts and wiping it clean with a shop rag. First mark reference points on the glass before you remove it from the positioning site through use of a suction cup. Maintain the glass surface at a level position. Prime the vehicle body with Primer M before it dries for three minutes, and then use Primer G to coat the glass edge and contact surface and allow dry time. Use adhesive Part No.08850-00801 or its equivalent by cutting the cartridge nozzle into the sealer gun for applying it to the glass surface. Put the glass into place so it matches the reference points then push it softly until the stoppers are in position without touching the body of the vehicle and verify the space between the glass and car body. Check the glass fit at the front surface before scraping away surplus adhesive while driving the car only after the specified minimum downtime period has passed. After the adhesive has reached hardness perform a leak test then use auto glass sealer to close any found leaks.