OEM 2009 Scion xB Yaw Sensor

2009 Scion xB Parts Questions & Experts Answers

• Q: How to install a Yaw Sensor on 2009 Scion xB?

  A: The installation of the Yaw Rate and Acceleration Sensor requires connecting the sensor connector followed by securing the sensor and bracket using two bolts which must be tightened to 20 Nm (204 kgf-cm, 15 ft-lbf) torque and positioned without sensor damage and with proper installation. As the next step install the front seat assembly together with the seat track inner bracket cover and seat track cover and front seat headrest assembly. Connect the cable to the negative battery terminal before using a torque wrench with 5.4 Nm (55 kgf-cm, 48 in-lbf). Check the SRS warning light and use the diagnostic system to execute Yaw Rate and Acceleration Sensor zero point calibration. The VSC sensor signal check marks the end of installation steps.