How to install the Brake Light Switch on 2009 Scion xB?

The installation of the stop light switch requires insertion into the adjuster until it achieves contact with the brake pedal at the correct touch point that avoids pedal depression. After pushing the switch into the adjuster you should turn it clockwise by a quarter to lock it in place avoiding any force on the brake pedal. Gas/Petrol Drivers should perform the installation turning activity with a maximum force of 1.5 Nm (15 kgf-cm, 13 in-lbf). Complete installation requires verification of the switch clearance with a specified range of 1.5 to 2.5 mm (0.059 to 0.098 in.) before you connect the stop light connector to the switch.

OEM 2009 Scion xB Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2009 Scion xB Stoplamp Switch
Part Number: 84340-69025
$40.41 MSRP: $56.26
You Save: $15.85 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Stop Lamp; Brake Light Switch; Stoplight Switch
- Manufacturer Note: W(CRUISE CONTROL)
- Part Name Code: 84340
- Item Weight: 0.50 Pounds
- Item Dimensions: 14.2 x 12.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84340-69025
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2009 Scion xB Brake Light Switch

Looking for affordable OEM 2009 Scion xB Brake Light Switch? Explore our comprehensive catalogue of genuine 2009 Scion xB Brake Light Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion xB Parts Questions & Experts Answers

Q: How to install the Brake Light Switch on 2009 Scion xB?
A: The installation of the stop light switch requires insertion into the adjuster until it achieves contact with the brake pedal at the correct touch point that avoids pedal depression. After pushing the switch into the adjuster you should turn it clockwise by a quarter to lock it in place avoiding any force on the brake pedal. Gas/Petrol Drivers should perform the installation turning activity with a maximum force of 1.5 Nm (15 kgf-cm, 13 in-lbf). Complete installation requires verification of the switch clearance with a specified range of 1.5 to 2.5 mm (0.059 to 0.098 in.) before you connect the stop light connector to the switch.