How can you effectively remove the Yaw Sensor on 2008 Scion xB?

Unplug the negative battery cable first to begin the process. Disassemble from the front by first taking off the headrest then the seat track cover and seat track inner bracket. Unfasten the front seat assembly next to remove the Yaw Rate and Acceleration Sensor. Uninstall the yaw rate and acceleration sensor by taking off all 2 bolts and the sensor holding bracket before unplugging its connector. The SRS Air Bag system will be affected by some of these service procedures so make sure to read the SRS Air Bag system safety warnings before starting the job.

OEM 2008 Scion xB Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2008 Scion xB Yaw Rate Sensor
Part Number: 89180-12080
$999.99 MSRP: $1465.49
You Save: $465.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor
- Part Name Code: 89180
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.5 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-12080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2008 Scion xB Yaw Sensor

Looking for affordable OEM 2008 Scion xB Yaw Sensor? Explore our comprehensive catalogue of genuine 2008 Scion xB Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xB Parts Questions & Experts Answers

Q: How can you effectively remove the Yaw Sensor on 2008 Scion xB?
A: Unplug the negative battery cable first to begin the process. Disassemble from the front by first taking off the headrest then the seat track cover and seat track inner bracket. Unfasten the front seat assembly next to remove the Yaw Rate and Acceleration Sensor. Uninstall the yaw rate and acceleration sensor by taking off all 2 bolts and the sensor holding bracket before unplugging its connector. The SRS Air Bag system will be affected by some of these service procedures so make sure to read the SRS Air Bag system safety warnings before starting the job.