OEM 2010 Scion xB Yaw Sensor

2010 Scion xB Parts Questions & Experts Answers

• Q: How to install a Yaw Sensor on 2010 Scion xB?

  A: The Yaw Rate and Acceleration Sensor installation requires starting by plugging in the sensor connector followed by sensor and bracket mounting with two bolts which need a torque setting of 20 Nm (204 kgf-cm, 15 ft-lbf). The procedure should prevent sensor damage and verify complete assembly. Proceed by mounting the front seat assembly before installing the seat track inner bracket cover together with the seat track cover and front seat headrest assembly. The negative battery connection needs the cable wiring with 5.4 Nm torque force (55 kgf-cm 48 in-lbf). After checking the SRS warning light the technician must carry out a Yaw Rate and Acceleration Sensor zero point calibration. The VSC sensor signal needs to be checked to finish the installation process.