How to install the rear speed sensor on 2009 Scion xB?

Before installing the rear speed sensor, install the rear axle hub and bearing assembly and perform inspections for looseness on the rear axle hub bearing and runout measurements. Attach the speed sensor wire connector to its operating port. Starting with the installation of the rear disc and the rear disc brake caliper assembly you must secure the parking brake cable assembly afterward. Put in the rear floor side member cover before moving on to adjust the parking brake lever travel length. Guess the first step will involve attaching the upper console panel sub-assembly and rear wheel while tightening them up to 103 Nm (1050 kgf-cm, 76 ft-lbf). You should both attach the cable to the negative battery terminal at 5.4 Nm (55 kgf-cm, 48 in-lbf) torque then inspect the rear wheel alignment. The last step entails inspecting the VSC sensor signal.

OEM 2009 Scion xB Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
2009 Scion xB Speed Sensor
Part Number: 89413-08020
$138.64 MSRP: $196.26
You Save: $57.62 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Vehicle Speed Sensor; Automatic Transmission Speed Sensor; Sensor, Speed; Sensor, Transmission Revolution
- Replaces: 89413-33020, 89413-24010, 89411-33010
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.6 x 2.9 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Sensor, Speed, Front Passenger Side
Part Number: 89542-12080
$224.83 MSRP: $321.01
You Save: $96.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor; ABS Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.6 x 6.7 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-12080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB ABS Sensor, Front Driver Side
Part Number: 89543-12080
$240.09 MSRP: $342.80
You Save: $102.71 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 1.40 Pounds
- Item Dimensions: 13.9 x 11.4 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-12080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2009 Scion xB Speed Sensor

Looking for affordable OEM 2009 Scion xB Speed Sensor? Explore our comprehensive catalogue of genuine 2009 Scion xB Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion xB Speed Sensor Parts Q&A

Q: How to install the rear speed sensor on 2009 Scion xB?
A: Before installing the rear speed sensor, install the rear axle hub and bearing assembly and perform inspections for looseness on the rear axle hub bearing and runout measurements. Attach the speed sensor wire connector to its operating port. Starting with the installation of the rear disc and the rear disc brake caliper assembly you must secure the parking brake cable assembly afterward. Put in the rear floor side member cover before moving on to adjust the parking brake lever travel length. Guess the first step will involve attaching the upper console panel sub-assembly and rear wheel while tightening them up to 103 Nm (1050 kgf-cm, 76 ft-lbf). You should both attach the cable to the negative battery terminal at 5.4 Nm (55 kgf-cm, 48 in-lbf) torque then inspect the rear wheel alignment. The last step entails inspecting the VSC sensor signal.