Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
Position: Front Driver Side
Part Name Code: 89543
Item Weight: 1.40 Pounds
Item Dimensions: 13.9 x 11.4 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89543-12080
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
Base | 4 Cyl 2.4 L GAS
2010 Scion xB Speed Sensor
Looking for affordable OEM 2010 Scion xB Speed Sensor? Explore our comprehensive catalogue of genuine 2010 Scion xB Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Scion xB Speed Sensor Parts Q&A
Q: How to install the rear speed sensor on 2010 Scion xB?
A: Begin the installation of the rear speed sensor by putting in place the rear axle hub and bearing assembly. The rear axle hub bearing undergoes two checks for looseness and rear axle hub runout inspection. Fasten the speed sensor wire connector to its corresponding speed sensor. After properly installing the rear disc the installer can proceed to mount the rear disc brake caliper assembly. You should start by installing the parking brake cable assembly followed by the rear floor side member cover. Move on to the installation of the upper console panel sub-assembly after you adjust how far the parking brake lever can travel. Secure the rear wheel by applying 103 Nm torque (1050 kgf-cm) and attach the cable to the negative battery terminal with 5.4 Nm torque (55 kgf-cm). Conclude by inspecting the wheel alignment of the rear wheels together with checking the VSC sensor signal.