OEM 2008 Toyota Yaris Clutch Slave Cylinder

2008 Toyota Yaris Parts Questions & Experts Answers

• Q: How to install the Clutch Slave Cylinder assembly on 2008 Toyota Yaris?

  A: Install the clutch release cylinder assembly by tightening its 2 bolts to 12 Nm torque while making sure the measurement is in 120 kgf-cm or 8.7 ft-lbf. The installation requires connecting the clutch release cylinder with the flexible hose tube through the use of a union nut wrench at 14 Nm (144 kgf-cm, 10 ft-lbf) or 15 Nm (155 kgf-cm, 11 ft-lbf) depending on the presence of the wrench. A torque wrench that measures 300 mm (11.8 in.) and a union nut wrench at 22 mm (0.866 in.) with parallel placement to the torque wrench is necessary for achieving this specified torque value. Complete the connection the break fluid reservoir with brake fluid then conduct clutch system bleeding before applying torque of 8.3 Nm (85 kgf-cm, 73 in-lbf) if needed. Inspection for any clutch fluid leaks needs to be conducted as the last step of the procedure.