How to install the Clutch Slave Cylinder assembly on Toyota Yaris?

Install the clutch release cylinder assembly by tightening its 2 bolts to 12 Nm torque while making sure the measurement is in 120 kgf-cm or 8.7 ft-lbf. The installation requires connecting the clutch release cylinder with the flexible hose tube through the use of a union nut wrench at 14 Nm (144 kgf-cm, 10 ft-lbf) or 15 Nm (155 kgf-cm, 11 ft-lbf) depending on the presence of the wrench. A torque wrench that measures 300 mm (11.8 in.) and a union nut wrench at 22 mm (0.866 in.) with parallel placement to the torque wrench is necessary for achieving this specified torque value. Complete the connection the break fluid reservoir with brake fluid then conduct clutch system bleeding before applying torque of 8.3 Nm (85 kgf-cm, 73 in-lbf) if needed. Inspection for any clutch fluid leaks needs to be conducted as the last step of the procedure.

OEM Toyota Yaris Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Clutch Slave Cylinders found

View related parts
Toyota Yaris Slave Cylinder
Part Number: 31470-52121
$66.59 MSRP: $93.47
You Save: $26.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Replaces: 31470-52120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2018 Toyota Yaris | Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
View related parts
Toyota Yaris Slave Cylinder
Part Number: 31470-WB002
$114.48 MSRP: $160.70
You Save: $46.22 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Yaris | L, LE, XLE | 4 Cyl 1.5 L GAS

Toyota Yaris Clutch Slave Cylinder

Choose genuine Clutch Slave Cylinder that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Clutch Slave Cylinder for your Toyota Yaris? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Yaris parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Clutch Slave Cylinder of Toyota Yaris cars helps in the release of the clutch using force from the Clutch Master Cylinder when the pedal is depressed for gear shifting. This hydraulic part get input pressure from the master cylinder and extend a rod to release the clutch system. Hence, driving a car with problematic clutch slave cylinder could cause danger through unsafe shifting of gears and at the same time damage the transmission which is why replacement of the same is highly necessary for better car handling and safety. The master cylinder in Toyota Yaris cars transforms the energy applied by the driver into hydraulic pressure that acts on the slave cylinder to effect proper modification of clutch pressure for gear change.

Toyota Yaris Clutch Slave Cylinder Parts and Q&A

Slave Cylinder
31470-52121
Q: How to install the Clutch Slave Cylinder assembly on Toyota Yaris?
A:
Install the clutch release cylinder assembly by tightening its 2 bolts to 12 Nm torque while making sure the measurement is in 120 kgf-cm or 8.7 ft-lbf. The installation requires connecting the clutch release cylinder with the flexible hose tube through the use of a union nut wrench at 14 Nm (144 kgf-cm, 10 ft-lbf) or 15 Nm (155 kgf-cm, 11 ft-lbf) depending on the presence of the wrench. A torque wrench that measures 300 mm (11.8 in.) and a union nut wrench at 22 mm (0.866 in.) with parallel placement to the torque wrench is necessary for achieving this specified torque value. Complete the connection the break fluid reservoir with brake fluid then conduct clutch system bleeding before applying torque of 8.3 Nm (85 kgf-cm, 73 in-lbf) if needed. Inspection for any clutch fluid leaks needs to be conducted as the last step of the procedure.