How to remove the front door Car Speakers for the hatchback on 2008 Toyota Yaris?

The first step to remove the hatchback front door speaker requires the negative battery cable disconnect. Follow the process by removing the front door window regulator handle assembly for power window models or you can move straight to the front door armrest cover removal. You should remove the front door armrest base upper panel because this component exists in equal numbers for power and non-power window models. The front door trim board sub-assembly needs to be removed using the identical approach for both types of window systems. The correct next step is to remove the front No. 1 speaker assembly through connector detachment followed by drilling of the 3 rivet heads to less than 4 mm (0.16 in.) diameter and precise flange cutting around the rivet point. Introduction of caution is necessary since the cut rivet becomes exceptionally hot so keep the drill properly aligned with the rivet to prevent damage. Drill the flange until shards are pushed out then collect all rivet fragments and shavings from within the door by using a vacuum cleaner.

OEM 2008 Toyota Yaris Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Car Speakers found

View related parts
2008 Toyota Yaris Rear Speaker
Part Number: 86160-1A180
$103.44 MSRP: $140.73
You Save: $37.29 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly, Radio; Speaker, Rear; Package Tray Speaker; Speaker Assembly, Rear
- Position: Rear
- Replaces: 86160-33680
- Part Name Code: 86160B
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 86160-1A180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris Door Speaker, Rear
Part Number: 86160-2B580
$120.54 MSRP: $165.39
You Save: $44.85 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly, Radio; Speaker, Center, Center Rear, Front, Front Lower, Rear, Rear Lower; Rear Speaker; Front Driver Speaker; Rear Driver Speaker; Speaker; Speaker Assembly, Front; Speaker Assembly, Rear
- Manufacturer Note: TYPE B:REFER ILLUST.
- Position: Rear
- Item Weight: 4.20 Pounds
- Item Dimensions: 16.0 x 13.8 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 86160-2B580
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris Rear Speaker
Part Number: 86160-52220
$87.32 MSRP: $118.81
You Save: $31.49 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly, Radio; Speaker, Rear; Rear Driver Speaker; Speaker Assembly, Rear
- Manufacturer Note: AUDIO-RADIOLESS 2SPEAKER MULTI
- Position: Rear
- Part Name Code: 86160B
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 86160-52220
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS

2008 Toyota Yaris Car Speakers

Looking for affordable OEM 2008 Toyota Yaris Car Speakers? Explore our comprehensive catalogue of genuine 2008 Toyota Yaris Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Yaris Car Speakers Parts Q&A

Q: How to remove the front door Car Speakers for the hatchback on 2008 Toyota Yaris?
A: The first step to remove the hatchback front door speaker requires the negative battery cable disconnect. Follow the process by removing the front door window regulator handle assembly for power window models or you can move straight to the front door armrest cover removal. You should remove the front door armrest base upper panel because this component exists in equal numbers for power and non-power window models. The front door trim board sub-assembly needs to be removed using the identical approach for both types of window systems. The correct next step is to remove the front No. 1 speaker assembly through connector detachment followed by drilling of the 3 rivet heads to less than 4 mm (0.16 in.) diameter and precise flange cutting around the rivet point. Introduction of caution is necessary since the cut rivet becomes exceptionally hot so keep the drill properly aligned with the rivet to prevent damage. Drill the flange until shards are pushed out then collect all rivet fragments and shavings from within the door by using a vacuum cleaner.