How to install the front Window Motor assembly LH and related components on 2008 Toyota Tundra?

First apply MP grease to the sliding and rotating parts of the regulator motor assembly LH before inserting it with a T25 "TORX" screwdriver and tightening the 3 screws to 5.4 Nm (55 kgf-cm, 48 in-lbf). The installation of the front door window regulator sub-assembly LH requires matching the specific cab type between Regular Cab, Double Cab or CrewMax. Begin by fitting the front door glass sub-assembly LH and after that install the front door service hole cover LH while maintaining the specified cab type requirements. The installation sequence must follow the front No. 1 door trim bracket then the front No. 1 speaker assembly followed by the front door trim board sub-assembly LH and courtesy light assembly then the front lower door frame bracket garnish LH with the front upper armrest base panel LH of the same cab type. Complete the installation by placing the front door inside handle bezel plug LH on the vehicle then wire its cable to the negative terminal of the battery while some systems need initialization after the power reconnection.

OEM 2008 Toyota Tundra Window Motor

Window Lift Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Window Motors found

View related parts
2008 Toyota Tundra Window Motor
Part Number: 85720-AE010
$316.54 MSRP: $451.95
You Save: $135.41 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Power Window Regulator; Motor, Center Left, Front Left, Rear Left, Rear Right; Door Lock Actuator; Motor; Power Window Regulator Assembly for Front Driver, Passenger, and Driver Side.
- Replaces: 85720-35140
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 4.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85720-AE010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Window Motor
Part Number: 85710-AE010
$316.54 MSRP: $451.95
You Save: $135.41 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Power Window Regulator; Center Right, Front Right, Rear Left, Rear Right, Right; Motor; Power Window Regulator Assembly for Front Passenger, Driver, and Passenger Side.
- Replaces: 85710-35180
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.7 x 4.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85710-AE010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Window Motor, Rear
Part Number: 85710-0C080
$256.13 MSRP: $365.69
You Save: $109.56 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Power Window Regulator; Power Sliding Window Motor, Rear
- Position: Rear
- Part Name Code: 85710J
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85710-0C080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Capstone, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Tundra Window Motor

Looking for affordable OEM 2008 Toyota Tundra Window Motor? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Window Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Parts Questions & Experts Answers

Q: How to install the front Window Motor assembly LH and related components on 2008 Toyota Tundra?
A: First apply MP grease to the sliding and rotating parts of the regulator motor assembly LH before inserting it with a T25 "TORX" screwdriver and tightening the 3 screws to 5.4 Nm (55 kgf-cm, 48 in-lbf). The installation of the front door window regulator sub-assembly LH requires matching the specific cab type between Regular Cab, Double Cab or CrewMax. Begin by fitting the front door glass sub-assembly LH and after that install the front door service hole cover LH while maintaining the specified cab type requirements. The installation sequence must follow the front No. 1 door trim bracket then the front No. 1 speaker assembly followed by the front door trim board sub-assembly LH and courtesy light assembly then the front lower door frame bracket garnish LH with the front upper armrest base panel LH of the same cab type. Complete the installation by placing the front door inside handle bezel plug LH on the vehicle then wire its cable to the negative terminal of the battery while some systems need initialization after the power reconnection.