OEM 2008 Toyota Tundra Steering Angle Sensor

2008 Toyota Tundra Parts Questions & Experts Answers

• Q: How to remove the Steering Angle Sensor on 2008 Toyota Tundra?

  A: The first step for Steering Angle Sensor removal is disconnecting the cable from the negative battery terminal while waiting 90 seconds to stop Air Bag and seat belt pretensioner activation. The navigation system must wait 90 seconds after the ignition switch is turned off until you disconnect the cable. Rebooting procedures might become necessary for certain systems following restoration of the connection. Steer the front wheels in a direct position. The technician needs to separate the lower No. 3 steering wheel cover followed by removing both lower No. 2 steering wheel covers before extracting the steering pad. Initial removal of the steering wheel assembly must be followed by both lower and upper steering column covers. The last step involves taking out the Spiral Cable sub-assembly then proceeding to remove the Steering Angle Sensor. Special Service Tool: 09961-24510.