How to remove the Parking Assist Distance Sensor and the Glass Breakage Sensor for the Column Shift Type on 2008 Toyota Tundra?

Starting from the Column Shift Type you must detach the Ultrasonic Sensor and Glass Breakage Sensor by first taking off the front door scuff plate LH from Regular Cab, Double Cab, or CrewMax. Follow this step by taking out the left side cowl trim board from its specific cab model. You must take off the instrument center cover plus these additional panels: instrument panel LH side, lower instrument panel finish sub-assembly LH, instrument cluster finish panel trim. First uninstall the front ash receptacle box and lower instrument cluster finish panel before taking out the instrument panel cup holder assembly. Detach the 4 clips then disconnect the connector to take out the integration control and panel assembly. Complete the removal by disconnecting the 2 claw fasteners from the glass breakage sensor microphone.

OEM 2008 Toyota Tundra Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Assist Distance Sensors found

View related parts
2008 Toyota Tundra Parking Sensor, Rear Inner
Part Number: 89341-33130-C0
$182.43 MSRP: $260.47
You Save: $78.04 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Ultrasonic; Parking Aid Sensor, Rear Inner; Parking Sensors; Reverse Sensor; Sensor; Parking Aid Sensor
- Position: Rear Inner
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.0 x 2.4 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89341-33130-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Parking Sensor
Part Number: 89341-33180-C0
$201.18 MSRP: $287.24
You Save: $86.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Ultrasonic; Parking Aid Sensor, Front, Rear Outer; Parking Sensors; Sensor; Parking Aid Sensor
- Part Name Code: 89341A
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.0 x 2.4 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 89341-33180-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Tundra Parking Assist Distance Sensor

Looking for affordable OEM 2008 Toyota Tundra Parking Assist Distance Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Parking Assist Distance Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Parking Assist Distance Sensor Parts Q&A

Q: How to remove the Parking Assist Distance Sensor and the Glass Breakage Sensor for the Column Shift Type on 2008 Toyota Tundra?
A: Starting from the Column Shift Type you must detach the Ultrasonic Sensor and Glass Breakage Sensor by first taking off the front door scuff plate LH from Regular Cab, Double Cab, or CrewMax. Follow this step by taking out the left side cowl trim board from its specific cab model. You must take off the instrument center cover plus these additional panels: instrument panel LH side, lower instrument panel finish sub-assembly LH, instrument cluster finish panel trim. First uninstall the front ash receptacle box and lower instrument cluster finish panel before taking out the instrument panel cup holder assembly. Detach the 4 clips then disconnect the connector to take out the integration control and panel assembly. Complete the removal by disconnecting the 2 claw fasteners from the glass breakage sensor microphone.