Other Name: Speaker Assembly, Radio; Speaker, Center, Front Inner; Speaker; Speaker Assembly, Stereo Component; Speaker Assembly, Front
Position: Center
Item Weight: 0.60 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 86160-AC260
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2008 Toyota Tundra Car Speakers
Looking for affordable OEM 2008 Toyota Tundra Car Speakers? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Tundra Parts Questions & Experts Answers
Q: How to remove the instrument panel Car Speakers for CrewMax on 2008 Toyota Tundra?
A: The first step to remove CrewMax instrument panel speakers requires disconnecting the negative cable from the battery terminal followed by a minimum 90-second wait after turning off the ignition to allow the navigation system to save its memory. Proceed to the replacement by first removing the front pillar garnish pieces on both sides of the vehicle then unscrewing the 4 clips and claw with a screwdriver from the No. 1 instrument panel speaker panel sub-assembly assembly by padding the screwdriver's tip. The removal of the No. 2 instrument panel speaker panel sub-assembly follows the same method. Remove two bolts from the front No. 2 speaker assembly on the left side before disconnecting the connector while making sure to avoid the cone section of the speaker. Execute the same procedure for removing the front No. 2 speaker assembly on the right side of the vehicle framework. You must remove the No. 3 instrument panel speaker panel sub-assembly by taking out 6 clips and 2 claws using a taped screwdriver. The front No. 4 speaker assembly should be removed in vehicles with twelve speakers by using a screwdriver to remove its two bolts while disconnecting the connector and avoiding contact with the speaker cone.