Other Name: Speaker Assembly, Radio; Speaker, Center, Front Inner; Speaker; Speaker Assembly, Stereo Component; Speaker Assembly, Front
Position: Center
Item Weight: 0.60 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 86160-AC260
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tundra Submodels:
1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2009 Toyota Tundra Car Speakers
Looking for affordable OEM 2009 Toyota Tundra Car Speakers? Explore our comprehensive catalogue of genuine 2009 Toyota Tundra Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Tundra Parts Questions & Experts Answers
Q: How to remove the instrument panel Car Speakers for Double Cab on 2009 Toyota Tundra?
A: The first step to remove the Instrument Panel speaker from Double Cab involves disconnecting the negative battery cable followed by a 90-second wait after ignition cut-off to permit navigation system record functions and setting preservation. The first step involves removing the front pillar garnish on both sides and secondly you need to remove the No. 1 instrument panel speaker panel sub-assembly by using a screwdriver to detach the four clips while taping the tip beforehand is recommended. In the next step remove the No. 2 instrument panel speaker panel sub-assembly through the same procedure. You should first extract the 2 bolts from the left front No. 2 speaker assembly before disconnecting its connector using caution around the speaker cone and then do the same for the right front No. 2 speaker assembly. The technician should remove the No. 3 instrument panel speaker panel sub-assembly following the removal of eight clips and two claws using a screwdriver with taped tip. The process ends by unscrewing two bolts to remove the front No. 4 speaker assembly (for 10 speakers) while disconnecting the connector but avoiding contact with the speaker cone.