How to service and repair the alternator on 2008 Toyota Tundra?

Assume the following tools for alternator service: SST: 09820-63011 (09820-06010, 09820-06020). Apply the pulley holding tool to the rotor shaft while tightening its socket clockwise to 39 Nm (398 kgf-cm, 29 ft-lbf). The adapter gets installed into the vise first while the socket slots onto the adapter followed by attachment of the pulley nut. Turn the pulley holding tool clockwise while gently loosening the pulley nut until you reach a half turn position as rotor shaft damage can occur beyond that point. Following generator removal from the adapter, begin by discarding the socket and pulley holding tool and afterward remove both the pulley nut and pulley. The generator should be placed on the pulley while using tools to remove the 3 nuts which detach the rear end cover. You should remove the terminal insulator next followed by the generator brush holder assembly by taking out the two nuts. The generator coil assembly requires removal of four bolts through use of SST: 09950-40011, 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04071, 09957-04010, 09958-04011 before coil detachment. Inspector first takes off the generator washer and rotor assembly before working on the generator drive end frame bearing. He begins by undoing 4 screws and the retainer plate before tapping out the bearing using SST: 09950-60010, 09951-00250 and SST: 09950-70010, 09951-07100 with a hammer.

OEM 2008 Toyota Tundra Alternator

Generator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Alternators found

View related parts
2008 Toyota Tundra Alternator
Part Number: 27060-0S030
$326.07 MSRP: $465.55
You Save: $139.48 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Alternator Assembly, With Regulator; New Alternator; Alternator Assembly
- Manufacturer Note: 12V 100A
- Part Name Code: 27020
- Item Weight: 13.50 Pounds
- Item Dimensions: 12.2 x 9.5 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 27060-0S030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Alternator
Part Number: 27060-0S010
$296.60 MSRP: $423.47
You Save: $126.87 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Alternator Assembly, With Regulator; Alternator Reman; Alternators; Alternator Assembly
- Part Name Code: 27020
- Item Weight: 14.80 Pounds
- Item Dimensions: 9.3 x 8.2 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 27060-0S010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Alternator
Part Number: 27060-0S020
$377.26 MSRP: $552.89
You Save: $175.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Alternator Assembly, With Regulator; Alternator Reman; Alternators; Alternator Assembly
- Part Name Code: 27020
- Item Weight: 15.80 Pounds
- Item Dimensions: 10.2 x 8.2 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 27060-0S020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Alternator
Part Number: 27060-0F070-84
$222.13 MSRP: $295.81
You Save: $73.68 (25%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Reman Alternator
- Item Weight: 14.90 Pounds
- Item Dimensions: 13.1 x 10.5 x 9.1 inches
- Condition: New
- SKU: 27060-0F070-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2008 Toyota Tundra Alternator
Part Number: 27060-0P030-84
$194.42 MSRP: $258.64
You Save: $64.22 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Reman Alternator 1Gr
- Replaces: 27060-0P030
- Item Weight: 13.80 Pounds
- Item Dimensions: 13.0 x 10.6 x 8.8 inches
- Condition: New
- SKU: 27060-0P030-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, SR5 | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tundra Alternator
Part Number: 27060-0F080-84
$240.63 MSRP: $320.63
You Save: $80.00 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Reman Alternator
- Replaces: 27060-0F080
- Item Weight: 1.40 Pounds
- Item Dimensions: 13.1 x 10.5 x 8.8 inches
- Condition: New
- SKU: 27060-0F080-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, SR5 | 8 Cyl 4.7 L GAS

2008 Toyota Tundra Alternator

Looking for affordable OEM 2008 Toyota Tundra Alternator? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Alternator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Alternator Parts Q&A

Q: How to service and repair the alternator on 2008 Toyota Tundra?
A: Assume the following tools for alternator service: SST: 09820-63011 (09820-06010, 09820-06020). Apply the pulley holding tool to the rotor shaft while tightening its socket clockwise to 39 Nm (398 kgf-cm, 29 ft-lbf). The adapter gets installed into the vise first while the socket slots onto the adapter followed by attachment of the pulley nut. Turn the pulley holding tool clockwise while gently loosening the pulley nut until you reach a half turn position as rotor shaft damage can occur beyond that point. Following generator removal from the adapter, begin by discarding the socket and pulley holding tool and afterward remove both the pulley nut and pulley. The generator should be placed on the pulley while using tools to remove the 3 nuts which detach the rear end cover. You should remove the terminal insulator next followed by the generator brush holder assembly by taking out the two nuts. The generator coil assembly requires removal of four bolts through use of SST: 09950-40011, 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04071, 09957-04010, 09958-04011 before coil detachment. Inspector first takes off the generator washer and rotor assembly before working on the generator drive end frame bearing. He begins by undoing 4 screws and the retainer plate before tapping out the bearing using SST: 09950-60010, 09951-00250 and SST: 09950-70010, 09951-07100 with a hammer.

Related 2008 Toyota Tundra Parts

Alternate Year Models

2007 Toyota Tundra Alternator 2009 Toyota Tundra Alternator