How to Properly Install a Drive Shaft on 2008 Toyota Tacoma?

The first step to install the propeller shaft assembly of Access Cab 2WD and Double Cab 2WD requires removal of Special Service Tool: from the extension housing. Mount the propeller shaft into the extension housing and verify that both the propeller shaft flange and differential flange matchmarks face each other. Four bolts secured with 4 nuts and 4 washers should fasten the propeller shaft assembly which needs a torque setting of 88 Nm (899 kgf-cm, 65 ft-lbf). Place the center support bearing on its mount using two bolts then let the drain hole face downwards as a temporary installation step. When carrying out adjustments on the unladen vehicle maintain the specified intervals while verifying that the center line runs parallel to the axial direction and performing necessary correcting procedures. A measurement between the center bearing center line and center bearing housing center line in the longitudinal direction of the unladen vehicle should fall between -1.0 to 1.0 mm (-0.039 to 0.039 in.). After securing the 2 bolts at 36 Nm (369 kgf-cm, 27 ft-lbf) torque value check for any transmission oil leakage.

OEM 2008 Toyota Tacoma Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Drive Shafts found

View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04363
$888.92 MSRP: $1302.73
You Save: $413.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04362, 37100-04361, 37100-04360
- Item Weight: 42.10 Pounds
- Item Dimensions: 90.5 x 7.1 x 7.2 inches
- Condition: New
- SKU: 37100-04363
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, TRD Pro | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04321
$786.20 MSRP: $1152.19
You Save: $365.99 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04320
- Item Weight: 14.60 Pounds
- Item Dimensions: 33.7 x 6.8 x 5.6 inches
- Condition: New
- SKU: 37100-04321
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft, Front
Part Number: 37140-04041
$274.93 MSRP: $392.54
You Save: $117.61 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Replaces: 37140-04040
- Part Name Code: 37140
- Item Weight: 15.10 Pounds
- Item Dimensions: 34.7 x 6.7 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37140-04041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04332
$861.34 MSRP: $1262.30
You Save: $400.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04330, 37100-04331
- Condition: New
- SKU: 37100-04332
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota Tacoma Submodels:
- Base, TRD Pro | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04282
$792.90 MSRP: $1162.01
You Save: $369.11 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04280, 37100-04281
- Item Weight: 44.00 Pounds
- Item Dimensions: 78.4 x 7.2 x 7.2 inches
- Condition: New
- SKU: 37100-04282
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04311
$760.33 MSRP: $1114.26
You Save: $353.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04310
- Item Weight: 22.20 Pounds
- Item Dimensions: 84.2 x 7.1 x 7.1 inches
- Condition: New
- SKU: 37100-04311
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04371
$593.93 MSRP: $870.42
You Save: $276.49 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04370
- Part Name Code: 37110
- Item Weight: 15.00 Pounds
- Item Dimensions: 33.7 x 6.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37100-04371
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04291
$570.10 MSRP: $835.48
You Save: $265.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04290
- Part Name Code: 37110
- Item Weight: 15.00 Pounds
- Item Dimensions: 33.7 x 6.9 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37100-04291
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37110-04172
$517.66 MSRP: $758.64
You Save: $240.98 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37110-04170, 37110-04171
- Condition: New
- SKU: 37110-04172
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37110-04201
$438.55 MSRP: $642.70
You Save: $204.15 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37110-04200
- Item Weight: 15.00 Pounds
- Item Dimensions: 33.7 x 6.9 x 5.4 inches
- Condition: New
- SKU: 37110-04201
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37110-04191
$388.27 MSRP: $569.02
You Save: $180.75 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37110-04190
- Part Name Code: 37110
- Item Weight: 15.30 Pounds
- Item Dimensions: 33.4 x 6.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-04191
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37110-04182
$379.08 MSRP: $555.54
You Save: $176.46 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37110-04181, 37110-04180
- Part Name Code: 37110
- Item Weight: 22.00 Pounds
- Item Dimensions: 60.6 x 6.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-04182
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft, Front
Part Number: 37140-04050
$299.63 MSRP: $427.79
You Save: $128.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Part Name Code: 37140
- Item Weight: 14.90 Pounds
- Item Dimensions: 33.4 x 6.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37140-04050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04382
$588.94 MSRP: $863.09
You Save: $274.15 (32%)
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04381, 37100-04380
- Part Name Code: 37110
- Item Weight: 93.50 Pounds
- Item Dimensions: 97.9 x 10.4 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37100-04382
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04352
$570.10 MSRP: $835.48
You Save: $265.38 (32%)
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04350, 37100-04351
- Part Name Code: 37110
- Item Weight: 46.60 Pounds
- Item Dimensions: 86.1 x 7.1 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37100-04352
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04343
$861.68 MSRP: $1262.80
You Save: $401.12 (32%)
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04342, 37100-04341, 37100-04340
- Item Weight: 38.80 Pounds
- Item Dimensions: 76.2 x 7.4 x 7.1 inches
- Condition: New
- SKU: 37100-04343
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, TRD Pro | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Drive Shaft
Part Number: 37100-04302
$582.13 MSRP: $853.12
You Save: $270.99 (32%)
Ships in 1-3 Business Days
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37100-04300, 37100-04301
- Part Name Code: 37110
- Item Weight: 49.10 Pounds
- Item Dimensions: 82.4 x 8.3 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37100-04302
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS

2008 Toyota Tacoma Drive Shaft

Looking for affordable OEM 2008 Toyota Tacoma Drive Shaft? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Drive Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Parts Questions & Experts Answers

Q: How to Properly Install a Drive Shaft on 2008 Toyota Tacoma?
A: The first step to install the propeller shaft assembly of Access Cab 2WD and Double Cab 2WD requires removal of Special Service Tool: from the extension housing. Mount the propeller shaft into the extension housing and verify that both the propeller shaft flange and differential flange matchmarks face each other. Four bolts secured with 4 nuts and 4 washers should fasten the propeller shaft assembly which needs a torque setting of 88 Nm (899 kgf-cm, 65 ft-lbf). Place the center support bearing on its mount using two bolts then let the drain hole face downwards as a temporary installation step. When carrying out adjustments on the unladen vehicle maintain the specified intervals while verifying that the center line runs parallel to the axial direction and performing necessary correcting procedures. A measurement between the center bearing center line and center bearing housing center line in the longitudinal direction of the unladen vehicle should fall between -1.0 to 1.0 mm (-0.039 to 0.039 in.). After securing the 2 bolts at 36 Nm (369 kgf-cm, 27 ft-lbf) torque value check for any transmission oil leakage.

Related 2008 Toyota Tacoma Parts

Alternate Year Models

2007 Toyota Tacoma Drive Shaft 2009 Toyota Tacoma Drive Shaft