OEM 2008 Toyota Tacoma A/C Condenser

2008 Toyota Tacoma Parts Questions & Experts Answers

• Q: How to remove the A/C Condenser on 2008 Toyota Tacoma?

  A: Starting with refrigerant discharge from the refrigeration system the technician needs to disconnect the negative battery cable before proceeding with removal. The engine coolant needs draining independently for each 2TR-FE and 1GR-FE engine variant. The work begins with radiator grille removal after which technicians should extract the radiator support to frame seal LH on both the engine types and fan shroud removal for each engine type. The radiator assembly needs removal for 2TR-FE along with 1GR-FE engines. Separate the discharge hose sub-assembly through bolt removal and seal washer replacement with a mandatory step to use vinyl tape seals on both disconnected part ends to stop moisture and foreign substances. Detach the air conditioning tube assembly by unplugging the bolt along with the seal washer before you seal each opening with vinyl tape. The condenser removal process requires the user to eliminate 2 bolts followed by lifting the condenser then disengaging both the lower bracket attachment and removing it from the vehicle's rear side. Use a screwdriver to release then take out the condenser upper bracket on both the left and right sides along with lower bracket LH and RH by securing the tip with vinyl tape. Finally, remove the condenser. A fresh condenser must receive an injection of 40 cc (1.4 fl. oz.) compressor oil that uses RL-897 or a similar product for optimal operation.