How to properly install a Yaw Sensor on 2008 Toyota Sienna?

The Yaw Rate and Deceleration Sensor installation requires first connecting the sensor connector before tightening the sensor with 2 bolts up to 13 Nm torque. The process starts by installing the RH cowl side trim board through its attachment to the cowl side trim board plate RH and followed by RH front door scuff plate installation. The installation of the front seat assembly RH should be the next step after the cowl side trim board RH and front door scuff plate RH. The yaw rate and deceleration sensor zero point calibration should be performed post-installation while checking the ABS speed sensor signal.

OEM 2008 Toyota Sienna Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2008 Toyota Sienna Yaw Rate Sensor
Part Number: 89180-45010
$535.71 MSRP: $785.08
You Save: $249.37 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Sensor, Yawrate
- Part Name Code: 89183A
- Item Weight: 1.00 Pounds
- Item Dimensions: 5.5 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-45010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Sienna Yaw Sensor

Looking for affordable OEM 2008 Toyota Sienna Yaw Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Parts Questions & Experts Answers

Q: How to properly install a Yaw Sensor on 2008 Toyota Sienna?
A: The Yaw Rate and Deceleration Sensor installation requires first connecting the sensor connector before tightening the sensor with 2 bolts up to 13 Nm torque. The process starts by installing the RH cowl side trim board through its attachment to the cowl side trim board plate RH and followed by RH front door scuff plate installation. The installation of the front seat assembly RH should be the next step after the cowl side trim board RH and front door scuff plate RH. The yaw rate and deceleration sensor zero point calibration should be performed post-installation while checking the ABS speed sensor signal.