How to properly install a Yaw Sensor on 2009 Toyota Sienna?

Begin the Yaw Rate and Deceleration Sensor installation by connecting the yaw rate sensor connector then fastening the sensor with two bolts which need to be torqued to 13 Nm (136 kgf-cm, 10ft-lbf). Start by putting the nut through the cowl side trim board plate RH followed by the installation of front door scuff plate RH then the front seat assembly RH. Perform the yaw rate and deceleration sensor zero point calibration only after the installation process ends. Testing of the ABS speed sensor signal should be performed to verify its operational status.

OEM 2009 Toyota Sienna Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2009 Toyota Sienna Yaw Rate Sensor
Part Number: 89180-45010
$535.71 MSRP: $785.08
You Save: $249.37 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Sensor, Yawrate
- Part Name Code: 89183A
- Item Weight: 1.00 Pounds
- Item Dimensions: 5.5 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-45010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Sienna Yaw Sensor

Looking for affordable OEM 2009 Toyota Sienna Yaw Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Sienna Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sienna Parts Questions & Experts Answers

Q: How to properly install a Yaw Sensor on 2009 Toyota Sienna?
A: Begin the Yaw Rate and Deceleration Sensor installation by connecting the yaw rate sensor connector then fastening the sensor with two bolts which need to be torqued to 13 Nm (136 kgf-cm, 10ft-lbf). Start by putting the nut through the cowl side trim board plate RH followed by the installation of front door scuff plate RH then the front seat assembly RH. Perform the yaw rate and deceleration sensor zero point calibration only after the installation process ends. Testing of the ABS speed sensor signal should be performed to verify its operational status.