How to Service and Repair the Axle Shaft Assembly on 2008 Toyota Sienna?

For access to the rear drive shaft of 4WD you must first detach both the rear wheel and tail exhaust pipe assembly. After detaching the bolt of the sensor from the axle carrier you must proceed to remove it from its slot yet be cautious of potential sensor damage and unintended debris will attach to the sensor. Make use of Special Service Tool: 09930-00010 together with a hammer to loosen the rear axle shaft nut and unstake part of the nut before completion to prevent damage to the drive shaft screw. First apply the parking brake and then you should remove the axle shaft nut. The procedure for the rear drive shaft assembly LH starts by marking both the drive shaft and differential side gear shaft before uninstalling the 4 nuts and washers which disconnects the drive shaft from the differential side gear shaft and enables drive shaft removal from the axle carrier. When removing the drive shaft from the axle hub maintain safety by avoiding harm to the ABS speed sensor rotor serration on the drive shaft. The hub bearing requires support using the combination of Special Service Tools 09608-16042, 09608-02021, and 09608-02041 to protect it if vehicle weight becomes necessary.

OEM 2008 Toyota Sienna Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Axle Shafts found

View related parts
2008 Toyota Sienna Outer CV Joint, Driver Side
Part Number: 42370-09007
$259.52 MSRP: $370.53
You Save: $111.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Rear Drive; CV Joint; Outer Joint Assembly; Shaft Assembly, Rear Drive Outboard Joint, Driver Side; Shaft Assembly, Rear Drive Outboard Joint
- Position: Driver Side
- Item Weight: 13.50 Pounds
- Item Dimensions: 32.5 x 6.0 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42370-09007
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Axle Assembly, Passenger Side
Part Number: 43410-08041
$466.13 MSRP: $683.13
You Save: $217.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Right; GSP Cv Axle; Axle Shaft; Shaft Assembly, Front Drive, Passenger Side; CV Axle Assembly
- Position: Passenger Side
- Part Name Code: 43410
- Item Weight: 19.50 Pounds
- Item Dimensions: 47.8 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43410-08041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Axle Assembly, Driver Side
Part Number: 43420-08031
$431.97 MSRP: $633.05
You Save: $201.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Left; GSP Cv Axle; Axle Shaft; Shaft Assembly, Front Drive, Driver Side; CV Axle Assembly
- Position: Driver Side
- Part Name Code: 43420
- Item Weight: 18.90 Pounds
- Item Dimensions: 31.3 x 5.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43420-08031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Axle Shaft Assembly, Rear
Part Number: 42340-08010
$396.78 MSRP: $581.49
You Save: $184.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Rear Drive; CV Axle Assembly, Rear, Rear Left, Rear Right; GSP Cv Axle; Axle Shaft; Axle Assembly; Shaft Assembly, Rear Drive, Passenger Side; Shaft Assembly, Rear Drive, Driver Side; CV Axle Assembly
- Position: Rear
- Item Weight: 16.10 Pounds
- Item Dimensions: 28.4 x 8.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42340-08010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Axle Assembly, Driver Side
Part Number: 43420-08020
$298.66 MSRP: $452.96
You Save: $154.30 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Left; GSP Cv Axle; Axle Shaft; Shaft Assembly, Front Drive, Driver Side; CV Axle Assembly
- Position: Driver Side
- Part Name Code: 43420
- Item Weight: 20.60 Pounds
- Item Dimensions: 30.1 x 5.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43420-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Axle Assembly, Passenger Side
Part Number: 43410-08030
$364.89 MSRP: $561.28
You Save: $196.39 (35%)
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Right; GSP Cv Axle; Axle Shaft; Shaft Assembly, Front Drive, Passenger Side; CV Axle Assembly
- Position: Passenger Side
- Part Name Code: 43410
- Item Weight: 30.00 Pounds
- Item Dimensions: 50.9 x 6.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43410-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Sienna Axle Shaft

Looking for affordable OEM 2008 Toyota Sienna Axle Shaft? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Axle Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Parts Questions & Experts Answers

Q: How to Service and Repair the Axle Shaft Assembly on 2008 Toyota Sienna?
A: For access to the rear drive shaft of 4WD you must first detach both the rear wheel and tail exhaust pipe assembly. After detaching the bolt of the sensor from the axle carrier you must proceed to remove it from its slot yet be cautious of potential sensor damage and unintended debris will attach to the sensor. Make use of Special Service Tool: 09930-00010 together with a hammer to loosen the rear axle shaft nut and unstake part of the nut before completion to prevent damage to the drive shaft screw. First apply the parking brake and then you should remove the axle shaft nut. The procedure for the rear drive shaft assembly LH starts by marking both the drive shaft and differential side gear shaft before uninstalling the 4 nuts and washers which disconnects the drive shaft from the differential side gear shaft and enables drive shaft removal from the axle carrier. When removing the drive shaft from the axle hub maintain safety by avoiding harm to the ABS speed sensor rotor serration on the drive shaft. The hub bearing requires support using the combination of Special Service Tools 09608-16042, 09608-02021, and 09608-02041 to protect it if vehicle weight becomes necessary.