How to install the ABS Control Module on 2008 Toyota Sienna?

When installing the brake actuator users should keep the hole plugs inside their positions until the brake tubes get connected because new actuators arrive with preinstalled brake fluid. Use 2 nuts to install the brake actuator assembly according to 5.4 Nm of torque strength (55 kgf-cm or 48 in-lbf). You should install the actuator with bracket using 3 bolts while maintaining 20 Nm (199 kgf-cm, 14 ft-lbf) torque but avoid harm to both brake tubes and wire harness. Special Service Tool: 09720-00010 enables you to connect brake tubes to the designated locations on the actuator with bracket while achieving 15 Nm torque (155 kgf-cm) and connecting the brake actuator connector. First, install the air cleaner assembly with hose followed by filling the reservoir with brake fluid then bleeding master cylinder sub-assembly followed by braking line and actuator bleeding. Secondly inspect for brake fluid leaks while following up with verification of the reservoir fluid level prior to attaching the battery negative terminal. The final step includes Techstream evaluation of the brake actuator together with yaw rate sensor zero point calibration and initialization.

OEM 2008 Toyota Sienna ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 ABS Control Modules found

View related parts
2008 Toyota Sienna Hydraulic Unit
Part Number: 44050-08150
$1026.03 MSRP: $1291.57
You Save: $265.54 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Manufacturer Note: W(VSC)
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.3 x 8.0 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Hydraulic Unit
Part Number: 44050-08170
$995.04 MSRP: $1252.56
You Save: $257.52 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.1 x 7.7 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Hydraulic Unit
Part Number: 44050-08160
$969.28 MSRP: $1220.13
You Save: $250.85 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 8.9 x 7.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Hydraulic Unit
Part Number: 44050-08140
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 5.20 Pounds
- Item Dimensions: 9.0 x 7.6 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Hydraulic Unit
Part Number: 44050-08180
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Control Module; Actuator
- Manufacturer Note: CRUISE CONTROL-WITH(RADAR)
- Part Name Code: 44510
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.2 x 7.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS

2008 Toyota Sienna ABS Control Module

Looking for affordable OEM 2008 Toyota Sienna ABS Control Module? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Parts Questions & Experts Answers

Q: How to install the ABS Control Module on 2008 Toyota Sienna?
A: When installing the brake actuator users should keep the hole plugs inside their positions until the brake tubes get connected because new actuators arrive with preinstalled brake fluid. Use 2 nuts to install the brake actuator assembly according to 5.4 Nm of torque strength (55 kgf-cm or 48 in-lbf). You should install the actuator with bracket using 3 bolts while maintaining 20 Nm (199 kgf-cm, 14 ft-lbf) torque but avoid harm to both brake tubes and wire harness. Special Service Tool: 09720-00010 enables you to connect brake tubes to the designated locations on the actuator with bracket while achieving 15 Nm torque (155 kgf-cm) and connecting the brake actuator connector. First, install the air cleaner assembly with hose followed by filling the reservoir with brake fluid then bleeding master cylinder sub-assembly followed by braking line and actuator bleeding. Secondly inspect for brake fluid leaks while following up with verification of the reservoir fluid level prior to attaching the battery negative terminal. The final step includes Techstream evaluation of the brake actuator together with yaw rate sensor zero point calibration and initialization.