How to remove the ignition switch on 2008 Toyota Sequoia?

You must customize information about the Power Tilt and Power Telescopic Steering Column before starting the procedure to remove the ignition switch of the 2UZ-FE starting system. Take out the steering column cover located at the bottom position. You must disconnect the ignition or starter switch assembly connector followed by removing its two claws to pull out the ignition or starter switch assembly.

OEM 2008 Toyota Sequoia Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
2008 Toyota Sequoia Position Sensor
Part Number: 84052-71010
$61.21 MSRP: $85.91
You Save: $24.70 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
- Part Name Code: 84052
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.6 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84052-71010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Ignition Switch
Part Number: 84450-71010
$103.17 MSRP: $144.81
You Save: $41.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Part Name Code: 84450
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.4 x 5.7 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84450-71010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Ignition Switch

Looking for affordable OEM 2008 Toyota Sequoia Ignition Switch? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Ignition Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Parts Questions & Experts Answers

Q: How to remove the ignition switch on 2008 Toyota Sequoia?
A: You must customize information about the Power Tilt and Power Telescopic Steering Column before starting the procedure to remove the ignition switch of the 2UZ-FE starting system. Take out the steering column cover located at the bottom position. You must disconnect the ignition or starter switch assembly connector followed by removing its two claws to pull out the ignition or starter switch assembly.