How to install the Brake Light Switch assembly on 2008 Toyota Sequoia?

Installation of the stop light switch assembly To install the stop light switch assembly, take the switch and insert it to the adjuster until it makes contact with the brake pedal, and then insert it with a quarter turn clockwise without actually pressing the pedal. Make sure that the torque is not more than 1.5 Nm, clearance (0.5-2.6 mm), and connect the switch.

OEM 2008 Toyota Sequoia Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Toyota Sequoia Stoplamp Switch
Part Number: 84340-09310
$16.73 MSRP: $23.29
You Save: $6.56 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Stop Lamp; Brake Light Switch; Stoplight Switch
- Replaces: 84340-09040, 84340-09070, 84340-79015, 84340-09041, 84340-19026, 84340-19025
- Part Name Code: 84340
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84340-09310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Brake Light Switch

Looking for affordable OEM 2008 Toyota Sequoia Brake Light Switch? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Brake Light Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Brake Light Switch Parts Q&A

Q: How to install the Brake Light Switch assembly on 2008 Toyota Sequoia?
A: Installation of the stop light switch assembly To install the stop light switch assembly, take the switch and insert it to the adjuster until it makes contact with the brake pedal, and then insert it with a quarter turn clockwise without actually pressing the pedal. Make sure that the torque is not more than 1.5 Nm, clearance (0.5-2.6 mm), and connect the switch.