×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota RAV4 Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2008 Toyota RAV4 Vapor Canister
Part Number: 77740-0R010$567.38 MSRP: $831.49You Save: $264.11 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Canister Assembly, Charcoal
- Replaces: 77740-42090
- Part Name Code: 77740
- Item Weight: 5.50 Pounds
- Item Dimensions: 20.4 x 16.8 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 77740-0R010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota RAV4 Vapor Canister
Looking for affordable OEM 2008 Toyota RAV4 Vapor Canister? Explore our comprehensive catalogue of genuine 2008 Toyota RAV4 Vapor Canister. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota RAV4 Vapor Canister Parts Q&A
- Q: How to install the Vapor Canister on 2008 Toyota RAV4?A: The installation procedure for the 2AZ-FE engine Evaporative Emission Control Canister starts with securing the canister with four bolts and a clip while torquing them to 20 Nm (204 kgf-cm, 15 ft-lbf). Attach the air inlet line tube to the canister (leak detection pump) while the vent line tube requires installation through the pipe connection to the fuel tube connector followed by retaining claw activation. A thorough check must be performed to ensure the connected parts of the fuel tube connector and pipe have no scratches or foreign objects present before advancing or after verifying the fuel tank vent tube connection through fuel tube connector and pipe pull tests. Start the purge line hose connection by attaching the hose to both the canister and securing it with the retainer before connect the connector to the canister (leak detection pump). The negative battery terminal needs to receive the cable connection as the final step.