How to remove the ABS Control Module for Antilock Brakes on 2008 Toyota RAV4?

Begin the Hydraulic Control Assembly for Antilock Brakes removal process by disconnecting the negative cable battery terminal then waiting 90 seconds to avoid activating Air Bag and seat belt pretensioners. To access the air cleaner case of the 2AZ-FE engine you should perform the maintenance steps which start with purge VSV removal and culminate in the air cleaner case removal. The air cleaner case removal process for 2GR-FE units should begin by following the same procedure from air cleaner cap sub-assembly removal until it reaches the air cleaner case. The draining process for brake fluid should be followed by urgency to wash away fluid from painted areas. The service technician should detach each of the 6 brake lines from the actuator with Special Service Tool: 09023-00101 while tagging the installation spots on the lines. The procedure ends with removing the ABS and traction actuator assembly with bracket where you first disconnect the connector through the lock lever upward movement then remove the brake tube clamp from the bracket followed by taking off 3 nuts and removing the actuator and bracket while handling brake tubes with caution.

OEM 2008 Toyota RAV4 ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2008 Toyota RAV4 Modulator Valve
Part Number: 44050-42240
$731.04 MSRP: $920.24
You Save: $189.20 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: THIRD SEAT-WITH(2PERSONS)
- Part Name Code: 44510
- Item Weight: 10.60 Pounds
- Item Dimensions: 9.1 x 7.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-42240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota RAV4 Modulator Valve
Part Number: 44050-0R081
$641.94 MSRP: $808.09
You Save: $166.15 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Replaces: 44050-0R080
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.3 x 7.9 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-0R081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS
View related parts
2008 Toyota RAV4 Modulator Valve
Part Number: 44050-0R071
$589.96 MSRP: $742.65
You Save: $152.69 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: THIRD SEAT-WITH
- Part Name Code: 44510
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.0 x 8.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-0R071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota RAV4 Modulator Valve
Part Number: 44050-0R061
$641.94 MSRP: $808.09
You Save: $166.15 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.2 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-0R061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS

2008 Toyota RAV4 ABS Control Module

Looking for affordable OEM 2008 Toyota RAV4 ABS Control Module? Explore our comprehensive catalogue of genuine 2008 Toyota RAV4 ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota RAV4 Parts Questions & Experts Answers

Q: How to remove the ABS Control Module for Antilock Brakes on 2008 Toyota RAV4?
A: Begin the Hydraulic Control Assembly for Antilock Brakes removal process by disconnecting the negative cable battery terminal then waiting 90 seconds to avoid activating Air Bag and seat belt pretensioners. To access the air cleaner case of the 2AZ-FE engine you should perform the maintenance steps which start with purge VSV removal and culminate in the air cleaner case removal. The air cleaner case removal process for 2GR-FE units should begin by following the same procedure from air cleaner cap sub-assembly removal until it reaches the air cleaner case. The draining process for brake fluid should be followed by urgency to wash away fluid from painted areas. The service technician should detach each of the 6 brake lines from the actuator with Special Service Tool: 09023-00101 while tagging the installation spots on the lines. The procedure ends with removing the ABS and traction actuator assembly with bracket where you first disconnect the connector through the lock lever upward movement then remove the brake tube clamp from the bracket followed by taking off 3 nuts and removing the actuator and bracket while handling brake tubes with caution.