How to install the ABS Control Module with the brake actuator and bracket on 2009 Toyota RAV4?

Before installing the brake actuator together with its bracket you must keep the hole plug inside until completing the brake tube connection because new brake actuators contain brake fluid. Three nuts require a 19 Nm (194 kgf-cm, 14 ft-lbf) torque for installation of the actuator with bracket. It is essential to tighten the nuts in alphabetical order yet maintain proper care for the brake tubes and to avoid dropping the actuator with a mandatory replacement if it does get dropped. Begin by adding the brake tube clamp to the bracket; then correctly position all brake lines on the actuator before connecting them with a 10 mm union nut wrench at 15 Nm torque (155 kgf-cm, 11 ft-lbf) wrench-free or 14 Nm (145 kgf-cm, 10 ft-lbf) with wrench support while maintaining a 300 mm (11.8 in.) torque wrench fulcrum at 90 degrees from the union nut wrench. The procedure starts by attaching the connector then lowering the lock lever while performing fluid addition to the reservoir followed by bleeding air through the brake master cylinder and brake lines and ABS and traction actuator assembly before checking the fluid level and inspecting for leaks. The assembly process includes adding the air cleaner case sub-assembly for both 2AR-FE and 2GR-FE engines. Prior to checking the ABS and traction actuator assembly with Techstream you must connect the cable to the negative battery terminal.

OEM 2009 Toyota RAV4 ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 ABS Control Modules found

View related parts
2009 Toyota RAV4 Modulator Valve
Part Number: 44050-42240
$793.47 MSRP: $998.82
You Save: $205.35 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: THIRD SEAT-WITH(2PERSONS)
- Part Name Code: 44510
- Item Weight: 10.60 Pounds
- Item Dimensions: 9.1 x 7.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-42240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Actuator Assembly
Part Number: 44050-42351
$1054.63 MSRP: $1327.58
You Save: $272.95 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.1 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-42351
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Actuator Assembly
Part Number: 44050-42331
$1081.87 MSRP: $1361.86
You Save: $279.99 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module
- Manufacturer Note: MARK=48
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.3 x 7.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-42331
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.5 L GAS
View related parts
2009 Toyota RAV4 Actuator Assembly
Part Number: 44050-42301
$1080.40 MSRP: $1360.01
You Save: $279.61 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module
- Manufacturer Note: MARK=45
- Part Name Code: 44510
- Item Weight: 4.90 Pounds
- Item Dimensions: 8.9 x 7.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-42301
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.5 L GAS
View related parts
2009 Toyota RAV4 Modulator Valve
Part Number: 44050-0R091
$704.37 MSRP: $886.67
You Save: $182.30 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module
- Manufacturer Note: THIRD SEAT-WITH
- Part Name Code: 44510
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.9 x 7.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-0R091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Modulator Valve
Part Number: 44050-0R081
$704.37 MSRP: $886.67
You Save: $182.30 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Replaces: 44050-0R080
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.3 x 7.9 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-0R081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS
View related parts
2009 Toyota RAV4 Modulator Valve
Part Number: 44050-0R071
$616.52 MSRP: $776.08
You Save: $159.56 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: THIRD SEAT-WITH
- Part Name Code: 44510
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.0 x 8.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-0R071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Modulator Valve
Part Number: 44050-0R061
$704.37 MSRP: $886.67
You Save: $182.30 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.2 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-0R061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS
View related parts
2009 Toyota RAV4 Actuator Assembly
Part Number: 44050-42321
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.1 x 7.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-42321
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota RAV4 ABS Control Module

Looking for affordable OEM 2009 Toyota RAV4 ABS Control Module? Explore our comprehensive catalogue of genuine 2009 Toyota RAV4 ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota RAV4 ABS Control Module Parts Q&A

Q: How to install the ABS Control Module with the brake actuator and bracket on 2009 Toyota RAV4?
A: Before installing the brake actuator together with its bracket you must keep the hole plug inside until completing the brake tube connection because new brake actuators contain brake fluid. Three nuts require a 19 Nm (194 kgf-cm, 14 ft-lbf) torque for installation of the actuator with bracket. It is essential to tighten the nuts in alphabetical order yet maintain proper care for the brake tubes and to avoid dropping the actuator with a mandatory replacement if it does get dropped. Begin by adding the brake tube clamp to the bracket; then correctly position all brake lines on the actuator before connecting them with a 10 mm union nut wrench at 15 Nm torque (155 kgf-cm, 11 ft-lbf) wrench-free or 14 Nm (145 kgf-cm, 10 ft-lbf) with wrench support while maintaining a 300 mm (11.8 in.) torque wrench fulcrum at 90 degrees from the union nut wrench. The procedure starts by attaching the connector then lowering the lock lever while performing fluid addition to the reservoir followed by bleeding air through the brake master cylinder and brake lines and ABS and traction actuator assembly before checking the fluid level and inspecting for leaks. The assembly process includes adding the air cleaner case sub-assembly for both 2AR-FE and 2GR-FE engines. Prior to checking the ABS and traction actuator assembly with Techstream you must connect the cable to the negative battery terminal.

Alternate Year Models

2008 Toyota RAV4 ABS Control Module 2010 Toyota RAV4 ABS Control Module