How to disassemble the axle shaft on 2008 Toyota Matrix?

To take apart the front drive shaft you must first detach the No. 2 front axle inboard joint boot LH clamp with needle nose pliers and then cut the clamp with a side cutter before removing the piece. First detach the inboard joint boot from the inboard joint sub-assembly LH. Clean off the old grease from both parts while matching their positions but do not make holes in the inboard joint sub-assembly LH and outboard joint shaft assembly. After using a snap ring expander tool to remove the inner snap ring you need to place matchmarks on both parts of the outboard joint shaft assembly and tripod joint assembly. Use the brass bar to gently separate the tripod from outboard joint shaft using a hammer. Keep away from rolling component. Unfasten the LH boots clamp No.2 and take out the inboard joint boot along with its clamps. Apply the side cutter to the drive shaft damper setting clamp and remove the drive shaft damper. Use pliers to detach both No. 2 front axle outboard joint boot straps and front axle outboard joint boot straps prior to eliminating their respective outboard joint boots. Apply a screwdriver to remove the LH snap ring and deploy Special Service Tool 09950-00020 and a press to take out the dust cover LH while keeping the inboard joint safe from falling. We should repeat this dust cover removal method on the right-hand side component.

OEM 2008 Toyota Matrix Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Axle Shafts found

View related parts
2008 Toyota Matrix Axle Assembly, Driver Side
Part Number: 43420-01070
$387.86 MSRP: $568.41
You Save: $180.55 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Left; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Driver Side; CV Axle Assembly
- Position: Driver Side
- Part Name Code: 43420
- Item Weight: 14.90 Pounds
- Item Dimensions: 28.9 x 7.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43420-01070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Axle Assembly, Passenger Side
Part Number: 43410-02280
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Right; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Passenger Side; CV Axle Assembly
- Manufacturer Note: W(ABS)
- Position: Passenger Side
- Part Name Code: 43410
- Item Weight: 14.40 Pounds
- Item Dimensions: 29.5 x 7.3 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43410-02280
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Axle Assembly, Passenger Side
Part Number: 43410-02350
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Right; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Passenger Side; CV Axle Assembly
- Position: Passenger Side
- Part Name Code: 43410
- Item Weight: 17.70 Pounds
- Item Dimensions: 44.1 x 6.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43410-02350
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Axle Assembly, Passenger Side
Part Number: 43410-02310
$452.63 MSRP: $663.33
You Save: $210.70 (32%)
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Right; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Passenger Side; CV Axle Assembly
- Position: Passenger Side
- Part Name Code: 43410
- Item Weight: 20.20 Pounds
- Item Dimensions: 49.9 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43410-02310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Axle Assembly, Driver Side
Part Number: 43420-02390
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Left; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Driver Side; CV Axle Assembly
- Manufacturer Note: W(ABS)
- Position: Driver Side
- Part Name Code: 43420
- Item Weight: 15.20 Pounds
- Item Dimensions: 29.2 x 7.5 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43420-02390
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Axle Assembly, Passenger Side
Part Number: 43410-02320
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Right; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Passenger Side; CV Axle Assembly
- Manufacturer Note: W(ABS)
- Position: Passenger Side
- Part Name Code: 43410
- Item Weight: 25.30 Pounds
- Item Dimensions: 42.8 x 5.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43410-02320
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Axle Assembly, Driver Side
Part Number: 43420-01080
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Left; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Driver Side; CV Axle Assembly
- Manufacturer Note: W(ABS)
- Position: Driver Side
- Part Name Code: 43420
- Item Weight: 15.10 Pounds
- Item Dimensions: 28.9 x 7.5 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43420-01080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Axle Assembly, Driver Side
Part Number: 43420-01050
Product Specifications
- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Left; GSP Cv Axle; Axle Shaft; Axle; Shaft Assembly, Front Drive, Driver Side; CV Axle Assembly
- Position: Driver Side
- Part Name Code: 43420
- Item Weight: 14.40 Pounds
- Item Dimensions: 29.5 x 7.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43420-01050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS

2008 Toyota Matrix Axle Shaft

Looking for affordable OEM 2008 Toyota Matrix Axle Shaft? Explore our comprehensive catalogue of genuine 2008 Toyota Matrix Axle Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Matrix Axle Shaft Parts Q&A

Q: How to disassemble the axle shaft on 2008 Toyota Matrix?
A: To take apart the front drive shaft you must first detach the No. 2 front axle inboard joint boot LH clamp with needle nose pliers and then cut the clamp with a side cutter before removing the piece. First detach the inboard joint boot from the inboard joint sub-assembly LH. Clean off the old grease from both parts while matching their positions but do not make holes in the inboard joint sub-assembly LH and outboard joint shaft assembly. After using a snap ring expander tool to remove the inner snap ring you need to place matchmarks on both parts of the outboard joint shaft assembly and tripod joint assembly. Use the brass bar to gently separate the tripod from outboard joint shaft using a hammer. Keep away from rolling component. Unfasten the LH boots clamp No.2 and take out the inboard joint boot along with its clamps. Apply the side cutter to the drive shaft damper setting clamp and remove the drive shaft damper. Use pliers to detach both No. 2 front axle outboard joint boot straps and front axle outboard joint boot straps prior to eliminating their respective outboard joint boots. Apply a screwdriver to remove the LH snap ring and deploy Special Service Tool 09950-00020 and a press to take out the dust cover LH while keeping the inboard joint safe from falling. We should repeat this dust cover removal method on the right-hand side component.

Related 2008 Toyota Matrix Parts

Alternate Year Models

2007 Toyota Matrix Axle Shaft 2009 Toyota Matrix Axle Shaft