How to install the throttle body on 2008 Toyota Highlander?

The beginning process to install the throttle body on the 2GR-FE engine control system starts with fitting a new throttle body gasket onto the intake air surge tank. Attach the throttle body with four bolts while twisting them to 10 Nm (102 kgf-cm, 7 ft-lbf). Begin installation by linking the two water by-pass hoses and then join the throttle body connector while also attaching its clamp. Complete the installation of the air cleaner cap sub-assembly then add engine coolant before inspecting for any leakages. The next steps involve installing the outer cowl top panel sub-assembly while you must also position the windshield wiper motor and link assembly and the cowl top ventilator louver sub-assembly. Set both right and left front wiper arm and blade assembly into place and then apply the No. 1 engine under cover and engine under cover assembly.

OEM 2008 Toyota Highlander Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Bodies found

View related parts
2008 Toyota Highlander Body Assembly, Throttle W/Throttle Position Sensor
Part Number: 22030-0P050
$304.52 MSRP: $434.79
You Save: $130.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle; Fuel Injection Throttle Body Assembly; Throttle Body
- Manufacturer Note: (L)
- Part Name Code: 22030
- Item Weight: 2.80 Pounds
- Item Dimensions: 9.2 x 8.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22030-0P050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid Limited, LE, LE Plus, Limited, Plus, SE, Sport, XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Body Assembly, Throttle
Part Number: 22030-20060
$355.24 MSRP: $520.61
You Save: $165.37 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injection Throttle Body Assembly; Throttle Body
- Part Name Code: 22210
- Item Weight: 2.50 Pounds
- Item Dimensions: 8.9 x 7.4 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22030-20060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS

2008 Toyota Highlander Throttle Body

Looking for affordable OEM 2008 Toyota Highlander Throttle Body? Explore our comprehensive catalogue of genuine 2008 Toyota Highlander Throttle Body. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Highlander Parts Questions & Experts Answers

Q: How to install the throttle body on 2008 Toyota Highlander?
A: The beginning process to install the throttle body on the 2GR-FE engine control system starts with fitting a new throttle body gasket onto the intake air surge tank. Attach the throttle body with four bolts while twisting them to 10 Nm (102 kgf-cm, 7 ft-lbf). Begin installation by linking the two water by-pass hoses and then join the throttle body connector while also attaching its clamp. Complete the installation of the air cleaner cap sub-assembly then add engine coolant before inspecting for any leakages. The next steps involve installing the outer cowl top panel sub-assembly while you must also position the windshield wiper motor and link assembly and the cowl top ventilator louver sub-assembly. Set both right and left front wiper arm and blade assembly into place and then apply the No. 1 engine under cover and engine under cover assembly.