My Garage
Cart

OEM 2008 Toyota Highlander Ignition Switch

Starter Ignition Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

  • 2008 Toyota Highlander Ignition Switch - 84052-71010
    2008 Toyota Highlander Ignition Switch Diagram - 84052-71010
    View related parts

    2008 Toyota Highlander Position Sensor

    Part Number: 84052-71010
    $61.21 MSRP: $85.91
    You Save: $24.70 (29%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
    • Part Name Code: 84052
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 13.6 x 11.6 x 2.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 84052-71010
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Highlander Submodels:
    • Base, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
  • 2008 Toyota Highlander Ignition Switch - 84450-71010
    2008 Toyota Highlander Ignition Switch Diagram - 84450-71010
    View related parts

    2008 Toyota Highlander Ignition Switch

    Part Number: 84450-71010
    $103.17 MSRP: $144.81
    You Save: $41.64 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch Assembly, Ignition Or Starter
    • Part Name Code: 84450
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 7.4 x 5.7 x 4.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 84450-71010
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Highlander Submodels:
    • Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2008 Toyota Highlander Ignition Switch

Looking for affordable OEM 2008 Toyota Highlander Ignition Switch? Explore our comprehensive catalogue of genuine 2008 Toyota Highlander Ignition Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Highlander Parts Questions & Experts Answers

  • Q: How to Remove the Ignition Switch Safely on 2008 Toyota Highlander?
    A: The first step to remove the ignition switch involves disconnecting the negative cable from the battery terminal but wait a minimum of 90 seconds to stop the Air Bags and seat belts pretensioners. System initiation may be needed before reattaching the cable to some systems. The maintenance process begins with uninstalling the center instrument cluster finish panel assembly that includes the Smart Key System. Then disconnect either the heater control and accessory assembly when using Manual Air Conditioning System or the air conditioning control assembly designed for Automatic Air Conditioning System. The service technician should remove the front door scuff plate LH followed by the cowl side trim sub-assembly LH and the lower instrument panel finish panel sub-assembly (applies to Manual and Automatic Air Conditioning Systems). You need to remove the upper console panel sub-assembly as well as the No. 2 console box duct when not installing the Rear Air Conditioning System along with the lower rear console box and console box assembly for both systems. To remove the engine switch disconnect the switch connector after taking out the front No. 1 console box insert while releasing the 2 claws holding the switch.

Related 2008 Toyota Highlander Parts