How to remove the antenna cable on 2008 Toyota Corolla?

You must first disassemble the upper instrument panel sub-assembly following its removal procedure up to its final step. Begin by removing the visor holder according to its installation steps until the holder and its connected parts can be detached for antenna cord access. You should uninstall the sunroof opening trim panels when driving with a sliding roof. Separate the antenna cord from the system by starting with the connector and plug disconnect at the rear before removing the 2 catches on the back panel and 9 clamps on the front panel. You can then take out the roof headlining assembly. Unplug the antenna from its position at the roof headlining part.

OEM 2008 Toyota Corolla Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Antenna Cable found

View related parts
2008 Toyota Corolla Antenna Cable
Part Number: 86101-02160
$132.66 MSRP: $187.79
You Save: $55.13 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Part Name Code: 86101
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.3 x 6.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-02160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS

2008 Toyota Corolla Antenna Cable

Looking for affordable OEM 2008 Toyota Corolla Antenna Cable? Explore our comprehensive catalogue of genuine 2008 Toyota Corolla Antenna Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Corolla Parts Questions & Experts Answers

Q: How to remove the antenna cable on 2008 Toyota Corolla?
A: You must first disassemble the upper instrument panel sub-assembly following its removal procedure up to its final step. Begin by removing the visor holder according to its installation steps until the holder and its connected parts can be detached for antenna cord access. You should uninstall the sunroof opening trim panels when driving with a sliding roof. Separate the antenna cord from the system by starting with the connector and plug disconnect at the rear before removing the 2 catches on the back panel and 9 clamps on the front panel. You can then take out the roof headlining assembly. Unplug the antenna from its position at the roof headlining part.

Related 2008 Toyota Corolla Parts

Alternate Year Models

2007 Toyota Corolla Antenna Cable 2009 Toyota Corolla Antenna Cable