OEM 2007 Toyota Corolla Antenna Cable

2007 Toyota Corolla Parts Questions & Experts Answers

• Q: How to service and repair the radio antenna cable on 2007 Toyota Corolla?

  A: The service and repair of the radio antenna cord begins by removing the upper part of the instrument panel with the necessary disconnection of related components to extract the antenna cord. The removal of components from the roof headlining assembly enables you to cut off the antenna cord. The sliding roof equipped vehicle requires removal of both the sunroof opening trim moulding and the sunroof opening trim moulding. The antenna cord requires two-step disconnect procedures starting with the removal of the rear connector along with the antenna cord plug followed by disengaging two clamps at the rear and nine clamps at the front side. Removal of the roof headlining assembly precedes the separation of the antenna cord from it. Attach the antenna cord on the designated roof headlining spot while keeping it placed in the middle of the 100 mm (3.94 in.) by 25 mm (0.98 in.) tape section but avoid letting any adhesive touch the back of the tape. Asset the roof headlining assembly by connecting clamps at its front section while also reinserting the antenna cord plug and connector at its rear surface. Reinstall the sunroof opening trim moulding if installed together with the antenna cord and the visor holder and the upper instrument panel subassembly.