OEM 2006 Toyota Corolla Antenna Cable

2006 Toyota Corolla Parts Questions & Experts Answers

• Q: How to replace the antenna cable sub-assembly on 2006 Toyota Corolla?

  A: The antenna cord sub-assembly requires access through removal of the instrument panel sub-assembly upper along with its related parts before beginning the replacement. The next step requires the removal of both the visor holder and components linked to roof headlining assembly so that staff can properly cut off the antenna cord. The sunroof opening trim moulding must be removed when your vehicle has a sliding roof. Unplugging both the antenna cord plug and rear connector follows the removal of the rear side clamps and subsequent disconnection of the 9 clamps at the front. Properly remove and set aside the roof headlining assembly while maintaining its flat shape before extracting the antenna cord sub-assembly located on the roof headlining. When placing the new antenna cord sub-assembly on the roof headlining maintain its position on the tape (100 mm x 25 mm) without letting it touch the adhesive surface. First reset the roof headlining assembly then fasten its 9 front clamps and connect the rear connector and plug. Both fixed and separated types of rear seatback assembly need installation together with the instrument panel sub-assembly upper.