How to Service and Repair Antenna Cable Installation on 2009 Toyota Corolla?

The procedure for installing the No. 2 antenna cord sub-assembly requires users to clamp five components while connecting the connector followed by tightening the bolt to 8.4 Nm (86 kgf-cm, 74 in-lbf) torque and finishing with clamp engagement and connector connection. After that install the radio receiver with bracket (w/o Navigation System) or the navigation receiver with bracket (w/ Navigation System). First install the instrument cluster finish panel assembly that comes with Navigation system then move to installing the upper instrument panel sub-assembly. Install the instrument panel wire assembly and fasten the front door opening trim Weather Strip to both the left-hand and right-hand sides. Position the lower instrument panel finish panel assembly together with the No. 1 instrument panel box door sub-assembly and glove compartment door assembly. Add first pillars with turbulence regulator equipped or not equipped with shield curtains on both left and right sides. The technician should install the combination meter assembly followed by the instrument cluster finish panel assembly and the center instrument panel register assembly. Finish the procedure by putting on the instrument panel ends LH and RH and lower panel finish panels LH and RH while connecting the cable to the negative battery terminal before checking the SRS warning light.

OEM 2009 Toyota Corolla Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Antenna Cables found

View related parts
2009 Toyota Corolla Antenna Cable
Part Number: 86101-02390
$77.68 MSRP: $109.04
You Save: $31.36 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Item Weight: 0.80 Pounds
- Condition: New
- SKU: 86101-02390
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2009 Toyota Corolla Submodels:
- Base, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Antenna Cable
Part Number: 86101-02380
$68.04 MSRP: $95.51
You Save: $27.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Item Weight: 0.80 Pounds
- Condition: New
- SKU: 86101-02380
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2009 Toyota Corolla Submodels:
- Base, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Antenna Cable
Part Number: 86808-02070
$55.46 MSRP: $77.20
You Save: $21.74 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Navigation Antenna; GPS Navigation System Antenna Cable
- Part Name Code: 86808
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86808-02070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- Base, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Antenna Cable
Part Number: 86101-02330
$117.70 MSRP: $166.62
You Save: $48.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Part Name Code: 86101
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.6 x 6.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-02330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- Base, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Antenna Cable
Part Number: 86101-02230
$80.15 MSRP: $112.52
You Save: $32.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Manufacturer Note: HAWAII SPEC OR PUERTO RICO SPEC&AUDIO-JBL-AM/FM CD-CHANGER 8SPEAKER BLUETOOTH
- Part Name Code: 86101
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.6 x 6.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-02230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- Base, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Antenna Cable
Part Number: 86101-12540
$79.85 MSRP: $112.08
You Save: $32.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Part Name Code: 86101
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.3 x 6.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-12540
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
- Base, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Corolla Antenna Cable
Part Number: 82162-12D60
Product Specifications
- Other Name: Wire, Floor
- Item Weight: 0.80 Pounds
- Condition: New
- SKU: 82162-12D60
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2009 Toyota Corolla Submodels:
- Base, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS

2009 Toyota Corolla Antenna Cable

Looking for affordable OEM 2009 Toyota Corolla Antenna Cable? Explore our comprehensive catalogue of genuine 2009 Toyota Corolla Antenna Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Corolla Parts Questions & Experts Answers

Q: How to Service and Repair Antenna Cable Installation on 2009 Toyota Corolla?
A: The procedure for installing the No. 2 antenna cord sub-assembly requires users to clamp five components while connecting the connector followed by tightening the bolt to 8.4 Nm (86 kgf-cm, 74 in-lbf) torque and finishing with clamp engagement and connector connection. After that install the radio receiver with bracket (w/o Navigation System) or the navigation receiver with bracket (w/ Navigation System). First install the instrument cluster finish panel assembly that comes with Navigation system then move to installing the upper instrument panel sub-assembly. Install the instrument panel wire assembly and fasten the front door opening trim Weather Strip to both the left-hand and right-hand sides. Position the lower instrument panel finish panel assembly together with the No. 1 instrument panel box door sub-assembly and glove compartment door assembly. Add first pillars with turbulence regulator equipped or not equipped with shield curtains on both left and right sides. The technician should install the combination meter assembly followed by the instrument cluster finish panel assembly and the center instrument panel register assembly. Finish the procedure by putting on the instrument panel ends LH and RH and lower panel finish panels LH and RH while connecting the cable to the negative battery terminal before checking the SRS warning light.

Related 2009 Toyota Corolla Parts

Alternate Year Models

2008 Toyota Corolla Antenna Cable 2010 Toyota Corolla Antenna Cable