Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Item Weight: 0.70 Pounds
Item Dimensions: 4.7 x 3.0 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89173-09120
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front/Right/Left; Air Bag Seat Sensor Mat; Occupant Detection Sensor; Air Bag Sensor; Occupant Sensor; Sensor, Seat Position Air Bag
Position: Passenger Side
Item Weight: 0.50 Pounds
Item Dimensions: 2.0 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-06030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
Base, CE, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front Left; Air Bag Seat Sensor Mat, Front Left; Air Bag Sensor; Occupant Sensor; Discriminating Sensor; Sensor, Seat Position Air Bag
Position: Front Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.2 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front, Upper; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
Position: Front
Item Weight: 0.60 Pounds
Item Dimensions: 4.2 x 2.6 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89831-02040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Lower; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
Manufacturer Note: NO.1
Position: Lower
Item Weight: 0.60 Pounds
Item Dimensions: 4.2 x 2.6 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89831-02030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor; Air Bag Sensor; Front Sensor
Position: Front
Replaces: 89173-09137
Condition: New
SKU: 89173-09170
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following 2008 Toyota Corolla Submodels:
CE, LE, S, XRS | 4 Cyl 1.8 L GAS
2008 Toyota Corolla Air Bag Sensor
Looking for affordable OEM 2008 Toyota Corolla Air Bag Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Corolla Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Corolla Parts Questions & Experts Answers
Q: How to install the side Air Bag sensor LH on 2008 Toyota Corolla?
A: Install the side Air Bag sensor LH when the ignition switch shows off and the battery negative (-) terminal gets removed. The installation requires at least a 90-second delay after disconnection before moving ahead. Impossible to perform the installation of the side Air Bag sensor LH with a nut that requires 9.0 Nm torque (92 kgf-cm, 80 in-lbf). The side Air Bag sensor LH must be replaced with a new one when there are signs of dropping damage or when case, bracket, or connector have any dents, cracks or defects. The SRS wiring must be kept away from other components along with any rim areas during the installation process while examining the entire assembly for loose segments. After installing the connector it will be attached to the side Air Bag sensor LH. The sequence of installation includes putting on the front seat outer belt assembly LH followed by center pillar garnish lower RH and rear door opening trim LH and front door opening trim LH and rear door scuff plate LH and front door scuff plate LH. A final step must include connecting the cable to the negative battery terminal before starting system initialization which could be mandatory after cable removal. Complete the inspection by checking that the SRS warning light operates correctly.