How to remove the ABS Control Module for the Antilock Brakes on 2008 Toyota Corolla?

Draining brake fluid represents the first task which leads to paint-surface cleaning of any fluid contact areas before starting Hydraulic Control Assembly for Antilock Brakes removal. The first step involves taking off the front wheel from the right side and thereafter removing the front fender liner from the right side and then separating the radiator grille sub-assembly and front bumper cover. First remove the left headlight assembly before moving onto the windshield washer jar assembly. Perform the brake actuator with bracket removal while disconnecting the actuator connector and employing Special Service Tool: 09023-00101 to release the six brake tubes which connects to the actuator with bracket. Mark the connections for later reassembly. Perform the removal of two bolts and nut which secure the actuator with bracket while taking care to avoid breaking the brake tubes and wire harness, finish this section by detaching the brake actuator from the bracket by removing its two nuts.

OEM 2008 Toyota Corolla ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Control Modules found

View related parts
2008 Toyota Corolla Modulator Valve
Part Number: 44050-12190
$1231.35 MSRP: $1550.03
You Save: $318.68 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Control Module; Actuator Assembly, ABS & Traction
- Manufacturer Note: W(VSC)
- Part Name Code: 44540
- Item Weight: 6.00 Pounds
- Item Dimensions: 8.0 x 6.9 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-12190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Corolla Modulator Valve
Part Number: 44050-12200
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly; Actuator Assembly, ABS & Traction
- Part Name Code: 44540
- Item Weight: 6.00 Pounds
- Item Dimensions: 8.1 x 6.9 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-12200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- CE, LE, S | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Corolla Modulator Valve
Part Number: 44050-02130
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.9 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-02130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS

2008 Toyota Corolla ABS Control Module

Looking for affordable OEM 2008 Toyota Corolla ABS Control Module? Explore our comprehensive catalogue of genuine 2008 Toyota Corolla ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Corolla ABS Control Module Parts Q&A

Q: How to remove the ABS Control Module for the Antilock Brakes on 2008 Toyota Corolla?
A: Draining brake fluid represents the first task which leads to paint-surface cleaning of any fluid contact areas before starting Hydraulic Control Assembly for Antilock Brakes removal. The first step involves taking off the front wheel from the right side and thereafter removing the front fender liner from the right side and then separating the radiator grille sub-assembly and front bumper cover. First remove the left headlight assembly before moving onto the windshield washer jar assembly. Perform the brake actuator with bracket removal while disconnecting the actuator connector and employing Special Service Tool: 09023-00101 to release the six brake tubes which connects to the actuator with bracket. Mark the connections for later reassembly. Perform the removal of two bolts and nut which secure the actuator with bracket while taking care to avoid breaking the brake tubes and wire harness, finish this section by detaching the brake actuator from the bracket by removing its two nuts.